Ingeniería mecánica Jobs

Expert required for PSCAD project

I am looking for a freelancer to perform a structure simulation using Ansys software. The simulation will be focused on fabricated structures(Electric House moving on traler) and will require experience in the field. The ideal freelancer will have knowledge of the following: - Ansys software - Mechanical engineering - Vibration analysis - Stress analysis -Structural Joints Dimension of E house 12 x 3 x 3.5 m The structure will be made from a steel sections, IGS drawing will be provided upon hiring. The main objective of the simulation will be place E house model on trailer to do vibration analysis, to ensure the structure can withstand any potential vibrations andacting forces during moving on trailer. If you are interested in this project, please provide examples of previous work in t...

I am in need of a skilled CAD designer who specializes in mechanical drawings. I have rough sketches that I would like to be turned into final CAD drawings, with a basic level of detail. The ideal candidate should have experience in mechanical CAD design and be proficient in AutoCAD or similar software. Attention to detail and the ability to accurately translate rough sketches into precise CAD drawings is a must.

It's more about developing model and simulating in the Matlab, need to explain with and without pitch controllers and analysis of the results

I need some small calculation work for "STRUCTURAL LOAD CALCULATIONS ,CRITICAL STRESS CALCULATIONS,FAILURE ANALYSIS " for working model.

Leased a new building and did a couple of changes. The old electrical and mechanical reports need to be updated. The company who did it for the landlord are busy and aren't replying to my requests.

I want someone to do Structural load calculations ,Critical stress calculations and Failure analysis for my design

I am looking for a skilled developer to create a metal stamping product with the following requirements: Features: - Multi-Stage Progressive Dies Material: - Stainless Steel Production Output: - Less than 100 pieces per hour Ideal Skills and Experience: - Experience in metal stamping product development - Knowledge of multi-stage progressive dies - Expertise in working with stainless steel - Ability to design custom shapes - Experience with automatic feeding systems is a plus Overall, I am seeking someone who is detail-oriented and able to deliver high-quality results.

I am looking for an Industrial Engineer who can help me with probability work. The project involves discrete and continuous probability. The probability models should be of intermediate complexity. The following skills and experience are ideal for this job: - Strong understanding of probability distributions, conditional probability, and Bayes theorem - Experience in applying probability concepts to manufacturing, supply chain, or general industrial engineering - Ability to create intermediate level probability models that can be used for decision making purposes If you have the skills and experience required for this project, please submit your proposal.

I am looking for a freelancer who can design and build an electric motor to linear force system for my subsea oil and gas equipment. The desired linear force output is 8.5 million Newtons. An example of a hydraulic version is shown below. We are looking for unique ideas to use a motor and gears to generate a similar force to replace the hydraulic version with electrical solutions. In order to be considered for this project, successful freelancers must provide detailed project proposals that showcase their experience in designing and building electric motor to linear force systems. Ideal skills and experience for this job include: - Electrical engineering - Mechanical engineering - Experience with subsea equipment - Experience with high force output systems The intended...

I am in need of a skilled freelancer to design the water-supplying systems of my medium-sized plant. The ideal candidate should have experience in designing combined gravity and pumped water supply systems and be familiar with municipal water sources. Key Requirements: - Design a pumped water supply system in Revit. - Experience with municipal water sources - Knowledge of designing systems for medium-sized plants (50,000-100,000 sq. ft.) Thank you for considering my project.

Hi, I'm looking for some FEA support. I have a few welded parts and some polyurethane wheels that needs to be tested. I would like to have tested in Ansys and compare it with our own Solidworks results. I'm on a tight budget in this stage of the project, so a low hourly price would be appreciated.

I need a custom electronic device built - the entire hardware including the hand piece, the PCB to full function Instructions to build, PCB Design & Layout, Firmware, GitHub files at the bottom of this article; Link to project page from MIT team: Component Cost: $150-$300 Note: This is an open-sourced project, so NDA is not required.

Mechanical Engineering Project: Computational Fluid Dynamics Analysis for Fire Extinguisher System Scope: - Analysis of the fire extinguisher system Type of Analysis: - Computational Fluid Dynamics (CFD) Intended Application: - Fire Extinguisher Ideal Skills and Experience: - Mechanical Engineering expertise - Experience in CFD analysis - Knowledge in fire suppression systems and their design -nozzle selection

Need to simulate a microwave system inside a simple cylinder. gettin the error Solving adaptive frequency ..., process hf3d error: Failed to solve port 1, solving at too low frequency is a possible cause. Please contact Ansys technical support.

Need an electrical engineer for a greenhouse for our customer

We are going to install mini-splits for heating and cooling in our A frame cabin in Rathdrum, Idaho. We need help with the correct calculations and paperwork for the building permit.

Structural Load Schedule and Design for Small-scale Project

Glucose, heart rate, blood pressure,

From the attached model base, i want to find the basic power distribution. Perhaps the engine efficiency map or other map that show how much power (percentage) contribute from engine and how much from motor or generator. How can i modify or improvised this model t meet my need to the most basic and simplest configuration data for beginner to understand.

we are looking for help designing an automatic pet feeder for my dogs. The feeder I'm seeking has to be suitable for medium-sized dogs, and should include two features: portion control, and timer-based feeding schedule. The feeder needs to be able to dispense precise portions, and must be able to maintain a strict feeding schedule on a regular basis. Additionally, I'd like the feeder to have a user-friendly interface so I can easily configure the settings as needed. It's essential that the feeder be robust enough to withstand daily use and any possible accidents from my dogs. It should also look aesthetically pleasing so it doesn't seem out of place when placed in my home. This is an important project to me, therefore we are hoping to find the right person who can...

I need an engineer that can do a full permit pack for residential solar projects in Florida

Good morning Here is what I envision... Doing Laparoscopic surgeries for 25 years I realized that the instruments are a handicap for performing even simple tasks, leave alone complicated ones which are a struggle. The reason is that they all lack a "wrist" joint. Drawing a parallel from Da Vinci robot which of course costs a fortune, I am envisioning a mechanical arrangement which will allow a Surgeon to transmit wrist motion of the surgeon to the tip of the instrument in ergonomic and congruent manner and which is powered by hand rather than actuaters. I can't do it alone and will need help of a subject matter I will be able to give inputs and provide user trials. Regards Dr Atul Bhatnagar 9810084378

This task requires the design and simulation of optical plethysmography. This task requires design and simulation of a digital, Arduino based plethysmography sensor that can detect pulsatile blood waveform and pulse rate from finger. It requires design and simulation in multisim online, tinker cad and physical implementation on breadboard. A full explanation of design needs to be included so that I can implement the physical circuit, you will provide simulated results. A report is to be included, explaining the design process, code, simulation results etc PCB design also needs to be implemented using easyeda online software. I will provide more information through message.

Hello Need fea analysis in solidworks More details after NDA

I need an elevation survey on existing 3200 s.f. residential slab. This will be as an Expert Witness report. No interpretation of the data will be necessary. The residence is in Sherman, Texas.

The goal of this project is to develop inverse kinematic equations for a 2-link spherical robot. These equations will allow me to calculate the joint angles required to position the end effector of the robot at a given point in space.

I am looking for an experienced freelancer who can help me optimize the design of my MEMS Thermal Flow sensor using COMSOL simulation. The desired outcome of the simulation is to optimize the sensor's design for maximum efficiency. I have a rough idea of the design but require assistance in finalizing it. The simulation results must be of high accuracy to ensure the sensor's performance is validated. Ideal skills and experience: - Expertise in COMSOL simulation software - Experience in MEMS Thermal Flow sensor design and optimization - Strong understanding of thermal behavior - Ability to deliver high accuracy simulation results - Excellent communication skills to ensure smooth collaboration throughout the project.

Por favor, regístrate o inicia sesión para ver los detalles.

I am looking for an experienced designer to design a plastic enclosure/casing/cabinet for a water level indicator/overflow alarm. This device will be used to prevent water damage. We have our all components to make this. I want only a good looking casing/cabinet for this. If you have relevant expertise, I look forward to hearing from you and discussing the project further.

a folding wall table 1200 x 1600mm that can rest on the wall while not in use. See Sguala wall table video attached.

I need a mechanical engineer to carry out engineering on attached project at 4 - 6 Eastwood st -- to satisfy Victorian standards for building permit and use for heating and cooling on job. I need the plans drawn and stamped

You should use COMBIN39 elements. You should be able to produce F/D graph using the results. Finally, you are expected to show me the steps. See the reference paper attached.

I need help with creating headlights and indicator lights for my university project. After creating finishing it with 3D rendering and exploding view and relevant tasks.

It should start with a comprehensive 3D model of the existing equipment. It could involve emulation of the Rubic cube, simulation of the code, and virtual linking of the code to the 3D image. Rockwell has emulation software. We have augmented reality glasses if they are compatible with your project I did a quick search for Development of Digital Twin on google scholar and found 692,000 papers - while obviously not all of these will be relevant I'm sure you'll find 20 or 30 which will lead you to how to develop a digital twin. Finally, as I explained the 3 Rubic cube solvers, also had the task of developing a digital twin on top of building/coding/testing the equipment. I've attached links to their videos for reference.

I am looking for a freelancer to design metal containers for industrial production processes. The ideal candidate should have experience in creating durable and efficient containers for large-scale production. Materials: Metal Purpose: For processes of production Size: Large (more than 10 liters) Skills and experience required: - Experience in designing industrial containers - Knowledge of metal fabrication - Understanding of production processes - Ability to create durable and efficient designs - Attention to detail and accuracy - Good communication skills to ensure that the design meets our needs. If you are interested in this project, please submit your proposal and portfolio. Thank you.

Mechanical engineering research paper

Looking for experienced Mechanical engineers to evaluate and interview fresh grads in the Mechanical engineering domain. This is a time-flexible, location-independent undertaking requiring about 10-20 hours per week. The ideal experience requirement is between 5-10 years of work experience. We pay per session/interview. This will be an ongoing project.

Looking for experienced Mechanical engineers to evaluate and interview fresh grads in the Mechanical engineering domain. This is a time-flexible, location-independent undertaking requiring about 10-20 hours per week. The ideal experience requirement is between 5-10 years of work experience. We pay per session/interview. This will be an ongoing project.

I am looking for a freelancer who can help me with my project to create an option task to print a PDF, create DXF, and export STEP files of all parts and assembly from selecting an Inventor assembly file from a folder. My ideal candidate should have experience in inventor ilogic. Deadline: - The project needs to be completed within 1 week. Skills and Experience: - Proficiency in Autodesk Inventor Ilogic - Experience with PDF, DXF, and STEP file formats - Attention to detail - Ability to work efficiently to meet tight deadlines.

I am looking for a skilled freelancer to help design, draw, and calculate heat load for my manufacturing process. I have a detailed list of design guidelines and requirements that need to be followed. Experience in industrial design is a must. The freelancer must be well-versed in CAD design and have the tools necessary to produce detailed drawings. Additionally, they must be familiar with heat load calculation and possess a solid understanding of this field. The goal of this project is to ensure the efficient production of products in a safe and energy-efficient environment. If you think you're the right fit for this job, please get in touch!

please see the hub roof structure doc as we have modified the dimensions and added some additional context. We are building a roof structure that can be added to smart lockers /hubs that allow for drone delivery and pick up. The roof structure should open a roof of the following dimensions 6.5 feet high, 6 ft long and 4.5 feet deep. The robotics should move packages placed on the landing pad that is exposed once the roof opens. There are 3 elevator shafts along the width of the locker hub that move packages up and down and into the correct position within the locker/hub.

I am looking for a freelancer who can perform a welding simulation in ANSYS. Specifically, I need an arc welding simulation for a project that involves specific materials. The main objective of the simulation is to analyze thermal stresses. Ideal Skills and Experience: - Experience with ANSYS software and arc welding simulations - Knowledge of materials science and the properties of specific materials - Understanding of thermal stress analysis and how it applies to welding simulations

I'm looking for a freelancer who can help me with a 5 axis NX-CAM machining operation. The specifics of the operation include milling metal, with a tolerance level of medium (0.1-0.5mm). The exact requirements of the machining operation will be provided to the selected bidder. I'm looking for someone who has experience with 5 axis machining and working with metal materials. If you have experience in this area, please don't hesitate to contact me!

I'm looking for a freelancer with experience in creating hydraulic/mechanical drawings to help with my project. I have existing drawings or sketches that need to have a moderate level of detail added to them. The purpose of the drawing is to form part of a proposal to a client. The freelancer should be able to take the sketches, understand the purpose of the project, and add the required level of detail to create an accurate and presentable result. The work should be completed and submitted in an easily accessible file format. Great attention to detail and time management skills, as well as a passion for creating precise drawings are essential for this role. If you think you have what it takes, I look forward to receiving your proposal. Thank you.

Saya mencari freelancer yang berada di indonesia untuk mengembangkan alat listrik untuk keperluan rumah tangga yang dapat mengubah energi mekanik menjadi energi listrik dan juga berfungsi sebagai powerbank. Alat tersebut harus memenuhi persyaratan desain khusus saya dan ukurannya ringkas. Keterampilan dan pengalaman ideal untuk proyek ini meliputi: - Keahlian teknik listrik - Pengetahuan tentang konversi energi - Pengalaman dengan pengembangan powerbank - Kemampuan untuk memenuhi persyaratan desain tertentu - Kemahiran dalam membuat desain yang kompak Saya terbuka untuk saran dan kolaborasi selama proses pengembangan.

an entry level report is required of approximately 20 pages talking about the power plants there role and what they are for. and then discussing the methodology of how the report is done and discuss about the results obtaineed (results already obtained from the simulation )

Hello, I need someone to design and guide me how to build a 5 axis cnc mill capable of milling materials like titanium. I looked into using linux cnc, but I am open to options. Need automatic tool changing and a few other features. Looking to make something similar to this:

I am looking to hire a freelancer for a mechanical engineering project. The purpose of the project is failure analysis and I already have a specific material in mind for the analysis. To complete the project, I need the freelancer to conduct motion analysis and FEA using Solidworks for a mechanical assembly, and be able to provide analysis results within the software in a report form joining images and explanation. Video clips simulating the motion have to be included as well. I am confident that the right engineering professional will be able to bring their technical expertise to this project.

We are looking for an Knife Gate Valve Design Engineer capable where we can Engineer, Design and Draft Detailed Engineering Drawings for Class 300 of KGV's from scratch. There would be a ton of work to do. The ideal candidate will be responsible for executing and leading the full design process from ideation to production including Detailed Engineering Drawings. Must be knowledeable about Knife Gate Valves and the various standards. You will draw new designs and update the current designs. During the creation process, you will ensure that our designs meeting all necessary design and Valve standards and Norms. Responsibilities • Draw, update, and maintain designs • Manage multiple complex projects at the same time • Ensure our designs meet manufacturing, technica...