Diseño de fabricación Jobs

Manufacturing Design is a discipline of engineering concerned with designing products in such a way so that they can be easily manufactured. Processes concerning the manufacturing aspect can be designed in such a way so they can be easily managed, controlled and measured. If your business needs freelancer help with manufacturing design you have come to the right place. Post your manufacturing design job today to get started. Contratar a Manufacturing Design Engineers

Filtro

Mis búsquedas recientes
Filtrar por:
Presupuesto
a
a
a
Tipo
Habilidades
Idiomas
    Estado del trabajo
    24 trabajados encontrados, precios en USD

    Requirement : Design cheap Liquefied Petroleum Gases (LPG) detection sensor with alarm. The normal components of LPG thus, are propane (C3H8) and butane (C4H10). Small concentrations of other hydrocarbons may also be present. It should be a cheap sensor that sounds alarm when above components of LPG is detected. Only a qualified Engineer required.

    $90 (Avg Bid)
    $90 Oferta Promedio
    10 ofertas

    We are looking for vending machine designer with a below skills -Experience in product enclosure design -Detailed 2D/3D modeling & Design using Solid Works or Catia, NX, Creo etc which ever is the best fit for the project -Needs to have good insights of production ready development of product -Will be working hand in hand with the hardware development team/initial prototypes so needs to be...

    $167 (Avg Bid)
    $167 Oferta Promedio
    23 ofertas

    Hi everyone, I am searching for some designer to polish up some articles that we are writing about the manufacturing space. They are 90% done, but we just need a manufacturing expert to go through these articles and help build out some of the how to portions. If you are freelancing in this skill, you are likely good enough to fill in the gaps so please bid if you think you can assist with any of ...

    $126 (Avg Bid)
    $126 Oferta Promedio
    41 ofertas

    -Design and development of regenerative rocket engine (Thrust chamber, Nozzle and injectors) for 3D printing later, SOLIDWORKS design needed, Assembly -Design, modeling and simulation (flow, thermal, and stress) to develop efficient cooling channels suitable for 3D printing (Need FEA, Thermal, and stress strain analysis) use ANSYS or SOLIDWORKS -Fabrication by metal 3D printing (done by me) -Know...

    $702 (Avg Bid)
    $702 Oferta Promedio
    26 ofertas

    -Design and development of regenerative rocket engine (Thrust chamber, Nozzle and injectors) by 3D printing. SOLIDWORKS design needed, Assembly -Design, modeling and simulation (flow, thermal, and stress) to develop efficient cooling channels suitable for 3D printing (Need FEA, Thermal, and stress strain analysis) use ANSYS or SOLIDWORKS -Fabrication by metal 3D printing (done by me) -Knowledge n...

    $409 (Avg Bid)
    $409 Oferta Promedio
    17 ofertas

    Hi, I need someone to manufacture 2 go kart frames with chassis, steering, axle etc. based on a design that I have. It needs to be done in under a month in the UAE. Total cost should come to 2000 AED or less, which is 540 USD for both karts combined. Please get back to me if interested. I have attached diagrams of the kart.

    $250 - $540
    $250 - $540
    0 ofertas

    i need who are expert on the field only , on : 1 - A Pull Planning Framework 2- Shop Floor Control 3- Production Scheduling 4- Aggregate and Workforce Planning thank you

    $53 (Avg Bid)
    $53 Oferta Promedio
    11 ofertas
    Manufacturer 4 días left

    My name is Josh Goossen-Brown and I am a pitching coach at a junior college. I have an idea I’d like to make into a real product. It’s a simple concept that could be be very valuable for baseball players and all athletes. I have some samples that I’ve been using so far. Would love to start producing this as soon as possible.

    $418 (Avg Bid)
    $418 Oferta Promedio
    27 ofertas

    i need who are expert on the field only , on : 1 - A Pull Planning Framework 2- Shop Floor Control 3- Production Scheduling 4- Aggregate and Workforce Planning thank you

    $30 (Avg Bid)
    $30 Oferta Promedio
    13 ofertas

    Hi, I need someone to manufacture 2 go kart frames with chassis, steering, axle etc. based on a design that I have. It needs to be done in under a month and preferably in the UAE. If externally, it needs to be shipped or brought to the UAE. Total cost should come to 2000 AED or less, which is 540 USD for both karts combined. Please get back to me if interested. I have attached diagrams of the kart...

    $476 (Avg Bid)
    $476 Oferta Promedio
    11 ofertas

    I want a CAD design of charger mounted phone holder to hold phone during charging. It should be portable and eye catching design with temporary mount feature (can be removed later after use). The design should be such like that when charging plug mount in wall socket or charging plug mounted in extension plug socket (parallel to ground), it should not dis-balance.

    $49 (Avg Bid)
    $49 Oferta Promedio
    13 ofertas

    We are into:- • Pneumatic conveying system • Dust Extraction systems • Screw Conveyor • Rotary Airlock Valve • Mixer, Blender, Cyclone Separator, Bin Activator , silo • Auto weighing & batching system • Ash Handling System • Sugar Conveying Systems • Grain Handling, Milling , ...

    $327 (Avg Bid)
    $327 Oferta Promedio
    17 ofertas

    I need an overview of gasification technologies for plastics/polymers recycling, it should include technical data of technology as well as technology readiness level and name of companies/start-ups currently working on project.

    $181 (Avg Bid)
    $181 Oferta Promedio
    20 ofertas

    Hello. We are looking for a comited designer to work based on a salary. The idea is to have a guy work for us on a salary base that we will pay every 15 days like a normal job. We will asign you tasks. initially we don't have too much so the salary will be 100 dlls every 15 days. the current tasks wont take more than 5 to 10 hours a week, so 100 dlls is a good deal to start with. The first...

    $113 (Avg Bid)
    $113 Oferta Promedio
    49 ofertas

    We are looking to add another 1-2 Designers that have experience in modelling and texturing different products, Stainless steel, plastic, fabrics etc.... Must be very detailed and pay attention to the details. We are a digital agency located in new york with a large team of over 20+ designers and looking to add more designers to our team to keep up with demand. If this project goes well than you...

    $31 / hr (Avg Bid)
    $31 / hr Oferta Promedio
    96 ofertas

    I wish to get a Motorcycle alloy wheel rim design which can be made using Magnesium Alloy in the following sizes: 1.85 X 17/18/19" (Any One) 2.15 X 18/19/21" (Any One) I would need the designs to be submitted in .stp (or) .igs and .dwg Please send me your best quote. I am willing to buy/license any design resized for the above mentioned sizes if already validated. Usecase: Looking to...

    $140 (Avg Bid)
    $140 Oferta Promedio
    17 ofertas
    Modular Welding Jig Design 1 día left
    VERIFICADO

    Design of metal jig to build a simple steel structure with accurate positions for making structure components. We have a simple steel structure using Hollow Sections. The hollow sections are connected together using bolts on site. We need to design a jig that can be used to make these structures. The CAD drawing of the structure is already available. The jig should be solid and quick to use for w...

    $78 (Avg Bid)
    $78 Oferta Promedio
    34 ofertas

    i need whats given in attachment to be converted to Solidworks as fast as possible,, I'm not paying more than 30$,, consider it as a test or investment for a long term relationship,,, I need someone fast and accurate,,, dimensions are to be as much as possible exact so it would be manufactured and fit on a ford f-150

    $23 (Avg Bid)
    $23 Oferta Promedio
    39 ofertas

    A living hinge designed in SolidWorks with a "wide opening" for refillability. The living hinged "top" would be as flat as possible and made of plastic or LDPE. Looking for a designer who has had success in manufacturing with a living hinge. It would be similar to the image that I uploaded of the "head and shoulders" bottle but the bottom of the hand would be quite co...

    $18 / hr (Avg Bid)
    $18 / hr Oferta Promedio
    32 ofertas

    Need an Industrial Engineer/designer to develop Concepts for an Electric Motor cycle. Need a very strong knowledge in Electric vehicles. Need to be strong in developing concepts, hand sketches, 3D modeling, prototyping. Work scope is to come up with 5 concepts with hand sketches first. If we like it, then we can proceed to next steps.

    $1113 (Avg Bid)
    $1113 Oferta Promedio
    32 ofertas

    Por favor, regístrate o inicia sesión para ver los detalles.

    Sellado Acuerdo de Confidencialidad