Control board needs to be able to drive the 2 main LED lights and a secondary led, play audio files based on movement, light the secondary LEDs when the device detects an impact, basic on/off switch, and connect to a small 2w speaker. Fixed wiring for all components except for the switch and the lighting – these need connections so that they may be connected/disconnected during construction and maintenance of the toy.
Features & Maximum Ratings:
Dimensions: 53x23.5x7.5 mm (with the microSD card).
- Power supply: 5.5 to 11 V / 3.5A (with the High-power LED). 2 li-ion cells (18650 or 14500) batteries recommended.
- Idle current consumption : 10 mA (deep sleep mode)
- Speaker: 4 to 8 ohm. - Audio output Power : 2W
- Accent LEDs : 8 - Accent LEDs pad current source : 18 mA max per pad
- On-board, sizable PLI - Trident™ (cross-guard) support
- Blade mirroring accent LEDs
- Handles momentary or latching for blade activation
- Up to 12 selectable sound banks via audio menu
- Blaster Blocking, Force, Force Clash™ and Lockup Fx
- StabFx™, SpinFx™ & ComboFx™
- Blade Flickering & Core pulse Fx
- Blade Shimmering on Clash
- Blaster Sounds
- Up to 4 boot sounds
- Up to 16 swing and 16 clash sounds
- Flash on Clash™ (FoC™)
- Anti Power On / Off technology (A-POP™)
- Blaster Move™
- Power on Force™
- Hilt Angle Ignition Sound Selection
- Mute-on-The-Boot™
- Alternate Power Off sounds (motion vs no motion)
- Configurable Idle mode & power saving timer
- Wake-up on motion with WakeOnMove™
- Motion-triggered Ignition - 32 stage accent LED sequencer
- Crystal Chamber specials - WAV file support
- True 16 bit, 22.050 k Samples/sec crystal clear DAC
- iSaber Audio Player, up to 99 WAV tracks, play/pause/shuffle
- SD card support: up to 16GB, FAT16 or FAT32.
- FlexiBlend™ powered Color Mixing on 4 channels using the satellite board
- Configurable normal blade, FoC & Lockup colors
Housing: The control board, battery (Panasonic PAN1850P), and speaker need to be housed in a 22mm wide cylinder that is between 130mm and 150mm in length. Example: [login to view URL]
Lighting: The LEDs need to be mounted on a flat copper disc (20mm wide x 2mm deep) with the wires routed through a center hole and a disconnect between the LEDs and the cylinder/control board. This needs to be wired with a plug at the end to allow the lighting and wiring to be disconnected from the control board/device. LED Example: [login to view URL]
I will need all design files for this concept at completion of this project.
Hello,
My name is Federico González Bosque and I am an Industrial Designer.
Habilidades y experiencia relevante
I have 13 years of experience in design new products.
Htos propuestos
$555 USD - The budget will be sent after understand better the project.
Can you tell me more about your project?
Hi sir,
We have read your project completely , we can design you such board in Altium along with firmware. We will deliver you the pcb design files, gerber files, bill of material, firmware. We are however not able to provide you support on mechanical housing. However we can find you friendly freelancer who can do it for you on moderate rates. We will work with him on it.
Lets talk to us in details. We are very experienced engineers with professional attitude. Lets discuss
Our team is consist of engineers and developers with mostly 8+ years of experience in embedded product designs, we don't compromise on quality and satisfy the client to 100%. Lets talk to us!
We are very much looking forward to hear from you on this in coming days.
Regards,
Ahmad
TURKTRONICS