uIP based web server with freertos on LPC2468 board
$750-1500 USD
Cerrado
Publicado hace alrededor de 12 años
$750-1500 USD
Pagado a la entrega
The project is to write an embedded software including a web server based on the Freertos and the uIP stack on a NXP LPC2468 based board, the board is a customized board that include a 256 MB SDRAM (ISSI IS42S16160D), 4 GB NAND Flash(Micron MT29F4G08ABADAWP), 8K EEPROM (M24C08) and the IP113S.
the board has two I2C connected and the UART port.
the request is to have the following installed:
- Freertos
- uIP
- Webserver
- Drivers
- UART boot menu and firmware update.
the board has a Jtag connector, this will be connected to the Jlink pro debugger from Segger and connected to a computer where IAR Embedded workbench IDE (V 6.10) is installed, you will have avpn remote remote access to our system for debug and tests.
The webserver should include some common controls such as: username /password authentication, IP address management, GPIO control, System status, Firmware update, load default settings, reset function and backup/restore.
The system should also implement a telnet server, SSH server, SNMP and a dhcp client.
the delivery should be a comprehensive and well documented source code, and a working version on the board.
Also a brief user manual that include all written or edited functions (by the freelancer): name of the functions, input variables, outputs and brief description of the functions.
Some source code is already available (driver for the IP113S), but not tested. other tested such: system init, clock init, SDRAM driver, NAND Flash and UART driver but must be necessary reviewed.
other information could be delivered uppon request after signature of the NDA.
good bidding
Dear Sir,
We are Reserach and Development company whose working area are :
-Digital Motor Control
-Analog Design
-Electronic Design
-Power Electronics
-PCB design
-Embedded system
-Matlab
-Simulation of hardware
For each concept descriptions are as follows:
Digital Motor Control:
-3-phase induction motor vector control drive
-Flux estimation algoritm generation
-DSP(TMS320) implementation on motor drive
-Low speed application
-Torque and speed loop generation
-Control algoritms
Analog design
-Low power distribution
-Noissless special opamp based analog circuits
-Analog filters
-Orcad simulation of several circuits
Electronic Design
-RF transmitter and receiver
-Bluetooh reader and transmitter
-Magnetic reader
Power Electronics
-Implementation motor drive
-AC/DC converter
-DC-DC converter
-Battery charger
-Solar inverter
-Renewable Energy simulations
-Uninterruptle power supplies
PCB design
-Schematic design by Altium
-PCB design by Altium
-Power board design
-SMPS board design
Embedded system
-PIC18,PIC24,PIC30 and dsPIC applications
-Ardino
-MSP430
-Atmel
-DSP(Texas Instruments)
-Renesas
Matlab
-Power Electronics simulation
-Motor drive
-Wind Energy
-Solar Energy
-Control applications
Simulation of Hardware
-Orcad Simulation(TI,National, Linear Tech, Maxim libraries)
-LTI
-National
-Matlab
Very important Note: References attached. Please look excel file to see projects which we made until now!
Note: Payments will be funded as:
1)Initial:%25
2)Second stage:%15
3)Third stage:%20
4)Final stage:%40
Metin Akin
I've strong experience to design and develop both embedded hardware and software based on ARM architecture especially for NXP. Finished projects such as:-
- GSM/GRPS Weather station Data Logger (LPC212x + FreeRTOS)
- Vehicle Tracking Devices (LPC17xx + FreeRTOS)
I'm familiar to programming and testing remotely.
I have extensive experience in embedding FreeRTOS with IP connectivity on ARM based systems, with a number of recent projects focussed on providing a web-based UI.