Arduino IOT and iOS - Help me with a science project! -- 2

This project is a simple project that is helping me gather temperature sensor data on an iphone via BLE. There are two parts of this project: 1) Arduino / BLE / Temperature - Take an Arduino board with 5 Dallas Temperature 1-wire temperature sensors. Every 5 seconds, send the past 2 minutes of data (eg. time|temp1|temp2|temp3|temp4|temp5) (see attached document) 2) iPhone Application - Simple application that connects to the RedBear Labs BLE Beacon (above) and has the ability to record the data from the Arduino device. A simple start/stop to begin recording the data from the beacon and the ability to save (naming), store, and email the data file from the iPhone. This project is for an internal data collection project and will never be sold commercially. That means any means of writing the code is acceptable, I'm not concerned about using even sample code from similar projects. I've included some of the Arduino details and visual design details of the iPhone application that I'm looking for in the attached document.