DEVELOPING OPTICAL COMMUNICATION LINK ON OPTIWAVE/OPTISYSTEMS FOR CDMA BASED QAM SIGNAL

Cerrado Publicado hace 7 años Pagado a la entrega
Cerrado Pagado a la entrega

I need to basically develop an optical communication link, that will take 16, 64 and 256 bit QAM CDMA signal (please note CDMA!) and then upconvert it to 60GHZ passband frequency, and then send over to optical fibers, and upon reception by a Photodetector PIN, it will perform demodulation to extract the original transmitted bits and show how BER varies with 16, 64 and 256 bit CDMA QAM signal/different bit rates. Eye diagram, constellation diagram also needs to be assessed. Optical power meters, oscilloscope visualisers and optical spectrum analyzer needs to be used at signal sensitive points. The project should also show that how BER varies with different length optical fibers (50km, 75 km, 1000 km, etc)

Ingeniería eléctrica PHP Arquitectura de software Ingeniería de telecomunicaciones

Nº del proyecto: #10088932

Sobre el proyecto

2 propuestas Proyecto remoto Activo hace 7 años

2 freelancers están ofertando un promedio de RM750 por este trabajo

ClaudiuF

Hello, I would like to help you. I do have some experience using OptiPerformer. If you need my help please let me know. Thank you, Claudiu

RM800 MYR en 10 días
(2 comentarios)
3.3
angie1006

Hello! I read the project description and I think I might be a good candidate for it. I would need additional details for the project design, and it would be very helpful if you could point me to additional literature. Más

RM700 MYR en 30 días
(5 comentarios)
3.0