I need an UNO to control a 4 motors in forward and reverse. (by 8 bit word) There will be 2 bits per motor. The motors will be Uno driven, but and get data from 3 sources. (Local, RF and sensors) I have done this in parts, and need help pulling it all together. External sources can be by Nano. Use the code I have, modify it, or start from scratch. This way my code can help with decisions like pinouts etc... and can help us on our communications.
To bid, update my Sudo code (Or list comments on how you will do this) In the attachment I picked various COTs solution, and am flexible. (My final version is in CAD, but not critical to this code) Milestones should include: Draft, Review and Final. Ill look at the budgetary bids, down select /poll, then send more details to do a final RFQ selection.
In each section, you must help me replicate your functional code in my hardware. The review is to answer your questions, but also reserve time in case it doesn't compile for me. This is one of my Few RFQ's on freelancer, so feel free to ask questions, in case any part is not clear.
Hello, I can help you with your Arduino UNO RF project , but. I need more information about your project, components, deadline and other things.
Relevant Skills and Experience
Deliverable items:
- Code Arduino well explained and comments.
- Wiring Arduino diagram.
Proposed Milestones
$250 USD - Default Milestone
If you have any questions feel free to ask and contact me before your order.
Thank you, John.
Hi Im Farhat Shahir and Im a microcontroller programmer. I will write your project's code only in 66$ with 10 times revision I have build robots like humandroid, self learning and balancing.
Relevant Skills and Experience
Skills:
[login to view URL] kind of sensors, switchs, Led, relay
2. Motors and Drivers (DC, servo and all types of stepper motor)
[login to view URL],GSM, gyroscope(all types of)
[login to view URL] and SPI communication
[login to view URL]
Proposed Milestones
$20 USD - After completing the algorihm structure and 1st test code
$20 USD - After debugging and testing the prototype code
$26 USD - After the final code
Just give me pin diagram and hardware list.....its a piece of cake to me
$66 USD en 3 días
5,0 (4 comentarios)
2,9
2,9
19 freelancers están ofertando un promedio de $257 USD por este trabajo
Hello
I have experience in designing electronics circuits. I will make your project practically on breadboard and will write code for you. I can also assist you so you can make that your self.
Thanks
Relevant Skills and Experience
Electronics
Programming
Arduino
Android
Bluetooth Low Energy
IoT
Wireless
Proposed Milestones
$150 USD - Deliver the project.
Hi, I have a great experience in arduino projects. You can see my latest review on my profile page about arduino project. I can do this work. Just discuss the details with me
Relevant Skills and Experience
arduino, electrical engineering
Proposed Milestones
$400 USD - Complete
Hi , I am en embedded engineer and an Arduino expert .I have done a lot of robotics projects and wireless communication is my specialization.I have gone through your project description and attachment
Relevant Skills and Experience
arduino , wireless, microcontroller , c++, robotics .
Proposed Milestones
$50 USD - Research and report
$100 USD - Code , compatibility and testing
$100 USD - Handover and documentation
Additional Services Offered
$1 USD - 3D printing and designing
$1 USD - PCB manufacturing and designing
I would like to see your Arduino code/sketch and Feel free to send me a message here for discussion.
Hi,
I am electronic engineer. I have worked over 6 years about embedded systems.
İlgili Beceriler ve Deneyim
I have developed many project with uno and mega boards also I have worked with NRF24L01. We can talk all details over the chat.
All the BEST,
Ali SERBETCI
Önerilen Aşamalar
$250 USD - Part 1
$250 USD - Part 2
To control multiple motors using Arduino UNO
Relevant Skills and Experience
Arduino, Interfacing projects
Proposed Milestones
$250 USD - Milestones
Please check my portfolio/ profile for details. Thanks!
hello. i can do it for you.
i am from shenzhen china. its easy for me.
please PM me
Relevant Skills and Experience
robot controller
Proposed Milestones
$166 USD - one time
Hello. I have practice with all your hardware so its woudnt be a problem. NRFfeedback coud be implemented but its do project much more complicated.
Relevant Skills and Experience
5 years epirience with Arduino based projects
Proposed Milestones
$155 USD - for working code
Dear Sir, I have read your provided details in the excel file attached. The COTs selected are good. Checking Data coming from 3 sources and to actuate the motors in required direction accordingly.
Relevant Skills and Experience
Electronics, Programming, Circuit designing, sensors interfacing, Serial INTERFACING (RS-232, RS-422, RS485)
Proposed Milestones
$100 USD - Draft
$200 USD - Circuit designing and simulations
$100 USD - Programming
$100 USD - Final Deliverables and acceptance
Additional Services Offered
$150 USD - Complete report
Provide more design requirements
There are programming patterns implementation, I haven't tried them with arduino (Pub-Sub, Queue,Mediator Patterns, etc.). I don't have the jostick and the nrf24L01, but I can make the core to connect
Relevant Skills and Experience
Worked with shared resources.
ARM Cortex M
PIC MCU
Aware of Design Patterns
Proposed Milestones
$250 USD - Core System, State Machine and Command Queue
Hey man if you're looking to build a robot I'm your guy, I'll program up whatever you need, look over your design and I can even do a circuit board or two. Just let me know I got you the whole way.
Relevant Skills and Experience
Built an autonomous rc car
The Project is easy to implement. 15 days time is more than enough.
Can be done in 4 to 5 days once all raw material has arrived.
I won't need your code to develop this application. Bid is negotiable.
Relevant Skills and Experience
Working exprience with Arduino is 5 years. With PIC and ARM7 and RF's is 7 years.
Have done more than 100 robots so far.
Proposed Milestones
$150 USD - Advance. You can contact me via email and Skype regarding progress at flexible timings.
$50 USD - After 10 days when we have a video chat with a demo of your project with your feedback.
$77 USD - After completion with your approval at the time of Dispatch. Courier charges will be extra.
Additional Services Offered
$15 USD - Alternate cost effective options for the same project With Schematics and description.
Is it compulsory for you to use Arduino? It has user friendly libraries but not that sturdy to use.
Hi,
I did my Masters in Robotics. I have extensive experience in building one especially woth Arduino and raspberry pi. I would like yo know what the Robot is supposed to do and I think I would be able to help you.
im a developer and could deliver the required project on time
Relevant Skills and Experience
with my skills i never let anything wrong from side
Proposed Milestones
$250 USD - none
