Matlab programmer and consultant -fixed budget version
$15-25 CAD / hora
In this project,
It is a very simple project if you worked with finite element. It is simply post processing results. I am attaching an FEM post processor using Matlab. (attached [url removed, login to view])
I need to generate corresponding output for the points in the radial coordinate system. The points are represented by the yellow stars in pdf file. In engineering language, this is a composite with fibers and I need to generate the polar points (theta and r) of the common matrix medium. These points will be used to calculate the corresponding field variables displacements and stresses. I have already a program that calculates displacements and stresses but need to generate these points.
I also have a program that produces surface plots for displacements and stresses inside the fibers as shown by contour_ plots_pts.jpg.
tasks:
* Verify that contour plots inside fibers you will not verify the calculations but you will verify that the contour plots are for the corresponding points in space.
* Generate the polar coordinate points (theta and r) for points. The points will be dense between fibers. As shown in attached pdf file.
* Organize output in a manner similar to finite element
-Radial points in space are nodes with theta and r locations
% node numbers r theta Z
1.0000 0.3000 0.0000 0
-Field variables' values corresponding to these nodes
% node numbers radial stress shear stress
1.0000 1.00+[url removed, login to view] 0.00+[url removed, login to view]
* Plot (use existing codes) to generate the outcome in both surface and contour plots for the points outside fibers.
================
Again this is a seed hourly based project for potential future rehire.
I used surface and contour interchangeably to mean those plots generated by finite element packages for stresses and displacements.
Nº del proyecto: #7270397