Find Jobs
Hire Freelancers

Design and simulate a 4-bit Synchronous Up-Down Counter in Altera Max Plus II.

$30-250 USD

Terminado
Publicado hace más de 7 años

$30-250 USD

Pagado a la entrega
a) Title Page The title page should be a single page with only the following. information: i) Course number with section ii) Project title iii) Your name and IDs iv) The date the project is submitted. v) A brief description of the project b) Theory of operation: Explain how your circuit works, but do not give implementation details. This should be an expanded version of the introduction. That is to give a high level description of what your circuits do and how they do it. For example, you could explain any algorithms you implemented, any conditions or restrictions the user must observe to use the circuits, and the high level structure of your circuits at the block diagram level. c) Design details: This subsection is where you can go into the details of your design. It should contain any logical expressions you use, any Karnaugh maps or algebraic simplifications you performed, and any tables or state diagrams for sequential circuits. It should explain design techniques if they are not selfexplanatory. It should refer to the detailed documentation (such as schematic diagrams) explicitly. This section should also contain a description of any unusual problems you had and how you solved them. d) Schematic Diagrams. Make sure all input and output connectors are labeled with the proper signal name. Add labels for any interior signals that appear in the written description of the circuit, especially those that appear in logical expressions. e) The waveform resulting from the time simulation. Do as many simulations you consider that show the functionality of the circuit. You should set the waveform in the same order of variables that you provide in the truth tables. i) Use only functional simulation. f) Analysis, including comments and conclusions. 3) For this second project, you will proceed with the design and simulation of a four-bit Up-Down counter; you will need to use Flip-Flops JK negative edge triggered 74112. The flip flops are available in .mf library. This flip flops come in Dual-Packages so all you need is two of them. Implementation with other class of devices, like 71LS161/163 will not be considered. You need to take into consideration the following: a) The simulations should use a clock of 25 MHz b) The snap shots should show a complete count (from 0000 to 1111 and another for a count from 1111 to 0000), and should show uses of Asynchronous Clear and Preset. 4) The project will be evaluated considering the following aspects: a) Result correctness. b) Report completeness. c) Clarity of ideas. d) Bonus points implementing with ALTERA boards DE2-115 5) Deadlines: a) A Drop-box will be available for uploading your report and Quartus II files. Only documents submitted as Microsoft Word (.doc or .docx) or .PDF formats will be considered for the report. Also you need to submit the respective design file (.BDF) and Waveform files (.VWF). b) Complete project due midnight July 25th 11:59 p.m. (Eastern Time).
ID del proyecto: 11071525

Información sobre el proyecto

2 propuestas
Proyecto remoto
Activo hace 8 años

¿Buscas ganar dinero?

Beneficios de presentar ofertas en Freelancer

Fija tu plazo y presupuesto
Cobra por tu trabajo
Describe tu propuesta
Es gratis registrarse y presentar ofertas en los trabajos
Adjudicado a:
Avatar del usuario
I am an Electrical Engineer having specialization in Electronics and Control, teaching in Electrical Department at FAST National University Pakistan. I am also persuing my MS degree in Electrical Engineering with specialization in CONTROL. I have taught the followings courses, and also done many projects related to these subjects as well as related to consumer electronics products. 1. Control System Design & Modelling (Continuous, Discrete, Linear, Non-Linear, Optimal, Fuzzy Logic + Matlab & Simulink) 2. Digital System/Logic Design (Verilog, VHDL, Logisim) 3. Micro-controllers (8051, Arduino, PIC) 4. Power Electronics (PSIM, MATLAB, PSpice) 5. Control of Electric Machine Drives 6. Circuit Analysis and Designe etc 7. PCB Design (Proteous + Ultiboard + Altium Designer) I assure you, if you assign your project to me, you surely gonna work with me in future. Note: I also provide the solution of mechanical engineering related projects.
$155 USD en 3 días
4,8 (238 comentarios)
7,2
7,2
2 freelancers están ofertando un promedio de $155 USD por este trabajo
Avatar del usuario
Dear sir I have more than 9 years experience in digital desing usin Altera tools, please check my profile also please message me so that we can discuss
$155 USD en 0 día
4,9 (131 comentarios)
6,8
6,8

Sobre este cliente

Bandera de UNITED STATES
Gulf Breeze, United States
5,0
5
Forma de pago verificada
Miembro desde jul 22, 2016

Verificación del cliente

¡Gracias! Te hemos enviado un enlace para reclamar tu crédito gratuito.
Algo salió mal al enviar tu correo electrónico. Por favor, intenta de nuevo.
Usuarios registrados Total de empleos publicados
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Cargando visualización previa
Permiso concedido para Geolocalización.
Tu sesión de acceso ha expirado y has sido desconectado. Por favor, inica sesión nuevamente.