Build GUI for system based on STM32 microcontroller

Hi, I am a post graduate power electronics engineer and having very good experience in product design and development. I am excellent in embedded design & programming using pic, dspic controllers and MATLAB codding for Power projects, Boot loaders, Bluetooth & GPS designs,CAN communication, EEprom. UART , RF circuits ,Protocols for networking, wi-Fi routers,OBD diagnosis with CAN bus protocols, Electrical vehicles and AC drives, stepper motor controls. I designed sine wave inverters for standalone and grid tie Inverters. I designed projects like Off line UPS up to 3 KVA, 5kW motor controller for electrical vehicles ,synchronous rectifiers, Solar MPPT chargers, Solar trackers, Battery chargers ,Grid tie inverters design with PLL and feedback control circuit emergency light of 66W and Online UPS control cards, Battery Charging power supplies, LED drivers for PWM controlling and dimming, SMPS, Power supplies. I have experience in schematics and PCB design experience in Altium and ORCAD. I am ready to work for you. Please contact for further discussion.

Good day, I have read your job description and I am confident that I can deliver this. I have experience with GUI libraries on the STM32 platform. I have worked with Segger EMwin, uGFX and other display libraries for the stm platform. I also have experience writing drivers for different displays that are not supported by this library. Please contact me so we can go over the details of your job. Thank you.

Hullo Bro , Regarding your project , I have worked lots with STM32F series of MCU (namely STM32F103 , STM32F207 , STM32F407 and STM32F429i) . I have worked on many projects including graphic LCD . I can show you sample of my work on my youtube channel. --------------------------------------------------------------------------------------------------------------------------------------------- I have long experience with 8-bit , 16-bit and 32-bit micro-controllers. I work with Microchip (PIC) , Atmel (AVR , SAM) , ST (STM) , TI (MSP) and NXP (LPC) micro-controllers. I use KEIL IDE , Atmel Studio , Code Composer Studio and MPLABX IDE . I deliver tested , neat and well-commented code that can be reused or modified for future development. More to be discussed once you contact me . BR, M.T.

I already developed graphics on touch screen . if you want to see than I will send you a video of it. so I can do your job within a time limit with your satisfaction.

We have extensive experience with GUI development on STM32 series, please contact us to discuss your application.

Hi. I am an electrical engineer with experience in the design and implementation of circuits in PCB, making circuits of power electronics, control electronics and intelligent systems using WiFi modules (ESP8266), microcontrollers (Arduino and Raspberry) applying graphical interfaces with programs such as Sublime Text , Labview and MATLAB GUI. I have designed circuits for power converters (AC / DC, AC / AC, DC / AC, DC / DC) as subsystems for circuits in Variable Frequency Drives, UPS, and intelligent systems such as intelligent light switch, smart plug, LED control Smart RGB, using softwares like proteus for simulation, and altium and EasyEDA for PCB design. I hope to meet your expectations and be able to work with you on this project.

Hello, I have experience in development of GUI for STM32 microcontroller. I developed GUI on STM32F429 and STM32F413 microcontrollers in past projects . In my opinion, purchase of LCD framework from some vendor and develop GUI on top of it will save lot of time and effort. Best Regards Hema

An Embedded System Freelancer with 13+ years of experience, working from Bangalore, INDIA. Could you please tell me more about the screen size required, display parameters, etc., Thx

we are interested in your project, please give me more details about project, we experienced HMI displays actually i designed some projects of gui, if you want i can send to you thanks for now...

I've been working with microcontrollers STM32 last 7 years. I have all the hardware to make this job. I have all the qualities that you are looking for. I have a strong belief that I would be able to make this project successful within short time. I will testing completely and write intelligible comments on each program step. And I will answer all your questions. I will give you advice in this area, and after the end of the job, as much as you'll need. I am very interested in the accumulation of work history and regular customers. I have a long term plan to work in here, that’s why I am here with all qualities and experiences. I am here not to cheat you rather help you. The last device which I made this Base Station Controller. 2 uC STM32F373. 74 analog inputs (with a possibility of reassignment of functions). 16 relays. 8 digital inputs. SD memory card, CAN Interface, USB, SPI Interface ,USART Interface, 1-wire Interface, Ethernet(UDP,TCP/IP, FTP), RS-485 Interface ,TFT screen, GSM-modem, heating. 8 user buttons. Analog and digital sensors of temperature/pressure/humidity. Control of single/three-phase mains (definition of frequency, imbalance, health). Control of single/three-phase generator (gas/diesel/petrol). Control wind turbine, solar panel. Measurement 24 battery cells, identify the faulty resistance. Measurement of grounding. Control refueling of fuel tanks (the definition of theft, leakage and other faults). Sending messages about emergency events via GSM, Ethe

Hello, I am having three years of experience in embedded firmware design, PCB design and electronics products design. This may be related to your requirement. Expertise in STM32F4 series controller and M0516 controller. Keyskill ARM 32bit AVR PIC 8051 EAGLE ALTIUM If you like my proposal, please contact me. Best Regards, Sandip N

I am a Electronic Component supplier , I can supply you with Integrated Circuits, Microchips , MicroControllers, Voltage Regulators, Relays, Crystals, Mosfet, Transistors and other (LCD, Connectors, Heat Sink etc. ) Active and Passive Components. Components can be delivered any place in India.

Be careful as you place your good money on this project. What you desire may not be achievable because of many things including speed of the processor and the memory involved. If display updation rate is not an issue it can be achieved by using external memory but again the controller may not be able to do much real time processing. If you want to discuss this further please do not hesitate to contact me. Kind Regards, Aditya Ayachit