Quick ATTiny10 project for Arduino IDE-- Random On/Off Lights

Completado Publicado hace 5 años Pagado a la entrega
Completado Pagado a la entrega

I need code developed for use in the Arduino IDE (assembly language includes ok) specifically for the ATTiny10 that would turn two lights on and off at random intervals. Since the ATTiny does not have a random number generator, you will need to develop a way to create pseudorandom on/off times as part of this project. The Tiny10 has two PWM outputs, so you will use these to control two LEDs. Each LED needs to have an independent on/off timer that turns the LED on after a random delay of 5-30 seconds, then keeps it on for a random time period of 30-90 seconds, then turns it off again. Both timers (one for each LED) need to be independent and use different random delays. Also, when LEDs come on or turn off, the PWM needs to be used so there is a quick (250ms total) ramp up to on and then ramp down to off.

Arduino Assembler Programación en C Microcontrolador

Nº del proyecto: #17929435

Sobre el proyecto

11 propuestas Proyecto remoto Activo hace 5 años

Adjudicado a:

ganapathi92

Hi I'm Interested in your Project, since the time periods are in Seconds it's not possible to implement PWM, we have use timer as delay generator and Switch each LED On/ OFF manually in Software If you are Intereste Más

$50 USD en 3 días
(35 comentarios)
4.7

11 freelancers están ofertando un promedio de $100 por este trabajo

ahmedmohamed85

Dear sir I know how to create a True random number generator using ATTiny10, please message me so that we can discuss Best regards

$100 USD en 1 día
(163 comentarios)
7.0
maxbul

I widely use Atmel controllers and also have an experience of using Arduino IDE for direct programming of Attiny/Atmega chips. I work with Arduino since 2010 and have more than 20 years of experience in programming Más

$120 USD en 3 días
(86 comentarios)
5.8
arrijal1992

Hi, The first thing we have to do is porting ATTIny to Arduino IDE, then I will looking for generate random number on Arduino. for PWM, we can use timer 0 and timer 1, although it has different on resolution, but I ca Más

$166 USD en 5 días
(49 comentarios)
5.7
raminoser

I am an Embedded Systems Designer Experienced in AVR & ARM microcontrollers .my last project was transmitting voice over uart from ATmega32a chip to matlab thanks and good luck .

$35 USD en 2 días
(8 comentarios)
3.9
Kristsp

Hello, I can make ATTiny10 project according to your description. Pseudo random sequence will need some starting seed value. So most likely while on/off sequence will appear to be random it will start with same sequenc Más

$60 USD en 5 días
(5 comentarios)
3.5
shahzain93

Hi, I will code in. C language and will use pseudo Random numbers, Can we discuss more in details? Thanks

$311 USD en 7 días
(0 comentarios)
3.1
cptknuckles669

I am working with Arduinos on a daily basis as a Research Engineer, developed several function libraries for our Robotics department. Relevant Skills and Experience I have experience in C/C++ programming as well as wi Más

$50 USD en 1 día
(0 comentarios)
0.0
Engmushahid

Hello, I am a Engineer with good knowledge of Arduino coding. I have done similar project in semester projects in university and i have a available code. so if you want kindly contact me. Thanks.

$55 USD en 3 días
(0 comentarios)
0.0