Find Jobs
Hire Freelancers

Commercial Arduino Project

$15-25 USD / hour

Cerrado
Publicado hace más de 9 años

$15-25 USD / hour

We have a device that currently runs Arduino code (2500 lines) but is not a standard Arduino board. It is a commercial product that is based on an ATMega 1284P, 8 relays, Roving Networks Wifi, Digi Xbee, RS485, FT800 GPU, LCD and RTC. The code is getting complicated and needs to be optimized for performance, future expansion and reliability. We are looking for someone with serious guru C skills (as well as Arduino familiarity) to analyze the existing code, make suggestions on it's improvement and, if agreed, follow through on those changes. If this small project is completed satisfactorily then further, larger projects related to the same hardware are very likely. Location is not a problem but we will provide you with example hardware. Real deep down AVR and embedded coding skills are required. This device communicates with a web-app so experience with Lua and Javascript that run at that end would be great but not required. Much more work is available to the engineer who proves him/her self.
ID del proyecto: 6142248

Información sobre el proyecto

19 propuestas
Proyecto remoto
Activo hace 10 años

¿Buscas ganar dinero?

Beneficios de presentar ofertas en Freelancer

Fija tu plazo y presupuesto
Cobra por tu trabajo
Describe tu propuesta
Es gratis registrarse y presentar ofertas en los trabajos
19 freelancers están ofertando un promedio de $24 USD /hora por este trabajo
Avatar del usuario
Предложение еще не подано
$25 USD en 5 días
5,0 (43 comentarios)
6,7
6,7
Avatar del usuario
Hello, I have extensive experience in C. I implemented several large projects on the AVR. Including work with XBee, RS485.
$25 USD en 5 días
4,8 (45 comentarios)
6,5
6,5
Avatar del usuario
I'm Electronic engineer and I would like to use my extensive Embedded system design and PCB design knowledge to do this projects . I'm so experienced with Arduino, PIC ,DSpics and expert with orcad, proteus,Ni multisim, PSpice , Matlab, .software. For more details you can go through my portfolio as well . thank you Chamika Gamage Electronic Engineer
$22 USD en 10 días
5,0 (19 comentarios)
5,2
5,2
Avatar del usuario
Hi, We are a team of electronics&embedded engineer with more than 10 years of experience in designing and developing various digital and embedded systems... We have done a lot of projects in Arduino. Also we conduct many workshops on Arduino.. Since we help engineering students to complete their academic projects, we have experienced with a lot of sensors, components, PCBs etc. Please check our completed projects...:-) Kindly let us know more details about this project and we can complete it together...:-) Thank You
$20 USD en 10 días
4,9 (12 comentarios)
4,8
4,8
Avatar del usuario
I have working with Arduino projects the last four years. The type of work described by you is within my skills. I am very interested to assist you in your development needs.
$16 USD en 5 días
5,0 (4 comentarios)
4,3
4,3
Avatar del usuario
Hello, Thank you for an opportunity to bid on your project. I have experience in AVR and C skills. Can you please send me the code so that I can review it. Kind regards, Huy
$25 USD en 5 días
5,0 (1 comentario)
3,9
3,9
Avatar del usuario
Hi. I am a professional Electronics Engineer having expertise in making PCB designs as well as in programming of PIC, Arduino, AT Mega, AT Tiny, 8051 etc. Contact me and lets start it
$35 USD en 5 días
4,4 (11 comentarios)
4,0
4,0
Avatar del usuario
Sir, I have worked on 8051, DSP, ARM (LPC2148, tiva series), Synap RF200 and MSP430 controllers. I have done 4 embedded projects during my Bachoelers and masters. I dont have knowladge in adruino but am good at grasping microcontroller concepts. In case you are interested in awarding the project please send a message
$15 USD en 5 días
5,0 (1 comentario)
1,7
1,7
Avatar del usuario
I am expert in desired skills for this project and have done similar tasks already. Please get back to me, so I can show you some of the work I have done. I will not be asking for any upfront only pay me when you are satisfied with the progress.
$20 USD en 5 días
1,2 (16 comentarios)
7,0
7,0
Avatar del usuario
La propuesta todavía no ha sido proveída
$22 USD en 5 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
I'm a C guru (been using C since 1978 when I worked on the Unix v6 kernel) and interested in helping out. I am currently self-employed (since 1985) developing embedded instrumentation, almost all of which is C with some assembly usually involved. I also have a number of Arduino's here, though all of my regular work is on custom system designs with volumes usually around 5000 to 10000 per year. I can provide appropriate references in the US (I work out of Oregon), too. Oh... and I have experience with Lua (through game engine back-ends) and Javascript (though less with Javascript as I don't do that much web design work.) I also have a complete electronics lab, three scopes (digital, analog, and MSO), GPIB controlled power supplies, 6.5 digit calibrated HP multimeter, signal generators, etc. My forte is embedded software but I'm fluent in analog and digital hardware design, as well. Regardless of what you decide, I really like the way you posted the work. It sounds as though you've set this up for an enjoyable pace to get to know each other (without either side jumping off a cliff) and find out if the relationship is a mutual one. Which is exactly how it should be done. Nice.
$27 USD en 5 días
0,0 (0 comentarios)
3,8
3,8
Avatar del usuario
Hello, I am an embedded systems designer and developer and would love to work on this AVR based project. Kindly contact for further conversation and award of project. regards, mak
$15 USD en 50 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
I have been deveoping firmware in C for past 3 to 4 years on various platforms and havw roked on bluetooth LCD RTC etc. I have also proved myself in C code optimization, Code analysis, Identifying potential issues and fixing them. Let me know more details about the project. then we can work it out
$27 USD en 5 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
I have an in depth experience in embedded design using different brand of micro controllers , such as AVR , arm , pic, ... And as electronic engineer , I developed lot of wireless embedded project and by the way I used the rovin network modules ( which are microchip now) , as well as I have a good experience in graphical user interfaces using TFT / LCD ..
$25 USD en 5 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
A proposal has not yet been provided
$22 USD en 5 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
I have had extensive embedded zigbee development experience. Please contact me if you have any questions. I would love to take this project on.
$22 USD en 5 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
I have used Arduino for multiple projects especially in Robotics and interfacing different sensors. Have experience working with Relay, Wifi shields, Xbee transceivers , LCD and RTC. My part was only the coding. Give me the code and I will prove myself. Let me suggest you some optimizations for free! Happy dealing :)
$22 USD en 40 días
0,0 (0 comentarios)
0,0
0,0

Sobre este cliente

Bandera de UNITED STATES
Springville, United States
0,0
0
Forma de pago verificada
Miembro desde oct 30, 2013

Verificación del cliente

¡Gracias! Te hemos enviado un enlace para reclamar tu crédito gratuito.
Algo salió mal al enviar tu correo electrónico. Por favor, intenta de nuevo.
Usuarios registrados Total de empleos publicados
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Cargando visualización previa
Permiso concedido para Geolocalización.
Tu sesión de acceso ha expirado y has sido desconectado. Por favor, inica sesión nuevamente.