Ingeniería de Construcción Jobs

I already have a detailed 2-D plan of the house and now need a staircase worked into that drawing using as little floor area as possible. The floor-to-floor height is 11 ft, so the solution has to respect comfortable tread and riser proportions while still keeping every inch of footprint to a minimum. I am completely flexible on style—spiral, straight, L-shaped, or any hybrid you think will squeeze the most out of the available space. You will receive the plan sketch. What I expect back are: • A revised DWG/PDF/sketch showing the staircase integrated into the current layout • Precise dimensions for rise, run, landing (if any) and headroom clearance • A short note explaining why your chosen configuration is the most space-efficient If you can add a quick 3-D or...

I'm seeking detailed engineering plans for a free-standing metal carport designed primarily for vehicle storage. Requirements: - Plans must be structurally sound and comply with local building codes - Design should accommodate multiple vehicle sizes - Include detailed materials list and assembly instructions - Provide options for drainage and ventilation Ideal Skills & Experience: - Expertise in structural engineering - Experience with metal construction - Knowledge of local building regulations - Strong technical drawing capabilities Please share any relevant work samples.

I need a complete set of shop drawings for a galvanized, Web Forge-style balustrade system that will be installed around commercial development substation . The look is deliberately industrial and rugged, so the drawings must capture the Web Forge balustrade requirements, galvanized finish. drawings to be referenced from attached drawings #1  Substation  --- drawing A21-01   - DETAIL A42-02 high lighted in green Scope • Produce fully dimensioned plans, elevations, sections and connection details for every run, return, stair and landing. • Include fixing plates, weld symbols, bolt sizes, post centre's, panel schedules and any expansion or splice joints. • Show how the balustrade interfaces with concrete slabs and steel stringers already in p...

I'm looking for a detailed pipeline alignment sheet to aid in construction. The sheet should include: - Bill of Materials: - Pipes and fittings - Valves and instrumentation - Flanges, bends, and elbows Ideal skills and experience: - Experience in pipeline construction documentation - Familiarity with Bill of Materials - Attention to detail and accuracy

Summary I need a complete MEP design package my trades can build from directly and that I can order all materials from. This is an engineering brief, not a drafting brief. I have supplied my architectural drawings. This project is limited to the basement and tha garage of this plan. c. 1,500 sq ft. The basement has six rooms: gym, bedroom, bathroom, utility, living room and playroom. Scope: 1. Coordinated drawings for electrical, plumbing and MVHR, plus a combined services drawing and sections, clash-checked against my architectural and structural drawings 2. Electrical: circuit and board schedules, cable sizing, earthing and bonding, load calculation against the existing supply, full lighting and socket layout 3. Plumbing: hot and cold design with pipe sizing, flow and pressure calculat...

I need an independent assessment of a retaining wall that is part of my boundary fence. The wall has been impacted by landscaping and building works done to the neighboring property. Requirements: - Assess structural integrity, focusing on the following issues: - Leaning or tilting - Bowing of foundation component - Height of retainer over 1 meter at its highest part - Review attached pictures of before and after the works. Ideal Skills and Experience: - Experience with structural assessments - Knowledge of retaining walls and boundary fences - Ability to analyze and report on structural issues

I need a qualified timber pest inspector to visit my townhouse and produce a written report that pinpoints the full extent of the current termite damage. I need to know if the house is safe to live in or if it needs to be condemned. Timing is critical—I’d like the inspection completed and the report in my hands within the next few days. While photographs or simple annotated diagrams aren’t mandatory, feel free to include them if they help illustrate your findings; visual context is always useful. Deliverables • PDF report Please tell me how quickly you can attend the property and provide the finished document, along with proof of your pest-inspection credentials or relevant experience working with termite-affected buildings.

We recently completed a backyard retaining wall project, and the City of San Diego has issued correction notices indicating that grading and slope restoration issues may need to be addressed. We are trying to understand the City's requirements and determine the appropriate path forward. We need assistance reviewing the City's comments, evaluating whether a grading permit is required, preparing any necessary plans, and communicating with the City regarding compliance.

I need a contractor to certify dry wells in Howard County, MD. The job involves reviewing designs to ensure they meet county-approved plans and conform to local building codes. Key Requirements: - Review designs for code compliance - Focus on drainage capacity Ideal Skills and Experience: - Knowledge of local building codes - Experience with dry well design and certification - Strong attention to detail

I need an 18x30 steel carport kit engineered for county approval. We already have all the materials. We need the plan stamped also. Ideal Skills and Experience: - Structural engineering expertise - Familiarity with local building codes and regulations - Experience with steel structures Please provide your credentials and estimated delivery time.

I need an engineer to create a structural design for a 15ft by 20ft lean to style wooden patio with a metal roof. 15ft out from the house and 20ft long with the 20ft length only having posts at the end. The design should include beams and rafters. Requirements: - Use of wood as the primary material - Stained wood finish - Design elements to include beams and rafters Ideal skills and experience: - Structural engineering expertise - Experience with wooden structures - Proficiency in design software - Knowledge of local building codes

Full Stack Developer Needed – Glass Railing Configurator & Shopify Integration Project Overview We are FMF Glass Hardware, a Canadian supplier of architectural glass hardware products serving contractors, glass companies, and builders across North America. We are looking for an experienced Full Stack Developer (or small development team) to build Phase 1 of a web-based Glass Railing Configurator that will integrate directly with our Shopify website. This project is NOT intended to be a highly advanced CAD software or engineering platform. We are looking for a practical, user-friendly business tool that helps customers design railing layouts, automatically select products from our inventory, generate a bill of materials (BOM), and place orders through Shopify. --- Phase 1 Sc...

**Project Title:** SAP2000 Structural Modeling and Analysis for 3-Story Reinforced Concrete Building (Urgent - 3 Hours) **Project Description:** I need an experienced Civil/Structural Engineer who is proficient in SAP2000 v26 to create and analyze a reinforced concrete building model for a university Construction Engineering & Management course project. The building is a 3-story Sustainable Student Life & Innovation Center with the following characteristics: * Building dimensions: 30 m × 24 m * Structural system: Reinforced Concrete Frame * Floors: Ground + 2 Floors * Floor heights: * Ground Floor: 4.5 m * First Floor: 4.0 m * Second Floor: 4.0 m * Grid spacing: 6 m × 6 m I will provide the architectural floor plans and conceptual design drawings. **Require...

Job Title: Tile Layout, Cutting Plan & Quantity Takeoff from DWG (Multiple Rooms) Job Description: I am looking for a CAD specialist / drafting professional with experience in tile layout design and construction detailing. The task involves creating detailed tile layouts based on DWG files for multiple rooms. Scope of Work: Create accurate tile layout drawings for each room based on DWG plans Include grout lines (seams) and 10 mm aluminum profiles where specified Design detailed tile cutting plans (showing all cut tiles and their positions) Calculate exact quantity of: Full tiles Cut tiles Total consumption per room Prepare a clean and readable PDF output for each room Start with room 3105 as a test sample before proceeding to other rooms Important Notes: Some rooms include two tile ty...

I need a detailed foundation plan for a 2-car garage and patio. The foundation should be slab-on-grade, suitable for clay soil, and reinforced with steel rebar. There will be a 7 inch rise (step) from garage 1 and garage 2. Requirements: - Structural integrity for slab-on-grade foundation - Adaptation to clay soil conditions - Steel rebar reinforcement specifications Ideal Skills and Experience: - Experience in foundation design - Knowledge of soil mechanics, especially clay - Proficiency in structural reinforcement techniques

I need a crawl space foundation for a small house. Requirements: - Concrete material for the foundation - Moisture protection is required Ideal skills and experience: - Experience in laying concrete foundations - Knowledge of moisture protection techniques

I would like to entrust the installation of drywall partitions and suspended ceilings to an experienced drywall professional. The work includes: • clean and efficient installation of drywall panels, • accurate calculation of required materials before starting, • reading and interpreting my plans or sketches, • providing practical advice throughout the project to ensure a flawless result. I remain available to discuss your methods, timelines, and any specific site constraints. If you are able to adapt your approach to different requirements and deliver high-quality finishing, let’s discuss this quickly.

I need an experienced engineer to design a wood-framed workshop measuring 30'x100'. The workshop will primarily be used for work, and I require an open floor plan. also frost foundation with 2'x2' thickened edge, #4 rebar 16" on center with foam 2' down and 4' out. Stamped drawing must be ND Engineer certified Ideal skills and experience: - Structural engineering expertise - Proficiency in designing open layout spaces - Experience with wood-framed constructions Please provide detailed plans and ensure the design meets local building codes.

Location: Remote Type: Contractor - hourly tracking Our firm is looking for a structural engineers who can run the assist with completing a full calculation package for pre-engineered metal buildings, concentrating on loading considerations, wind forces, and seismic forces. The main tasks include: Setting up accurate models in STAAD, based on structural drawings. Completing / Filling-in pre-set spreadsheet templates for both connections and anchorage. Iterating STAAD models, until structures meet acceptable utilization ratios, and reaction values. All work has to satisfy the governing local or state building codes, so you must be comfortable interpreting regional provisions and documenting compliance. You will be collaborating directly with our drafting team; clear mark-ups and prompt ...

I need a skilled structural engineer for a duplex project. Key Requirements: - Work with my detailed plans. - Focus on framing and structural integrity. Ideal Skills and Experience: - Strong background in structural engineering. - Experience with duplex or multi-family residential projects. - Ability to interpret and work with detailed architectural plans. Looking for someone who can ensure the structural soundness and integrity of the duplex.

I have three inspiration drawings for small timber-frame houses insulated with straw—30 m², 60 m² and 75 m². I now need each of them redrawn from scratch so that the files carry the exact dimensions we will build from, fresh call-outs/quotes on every sheet and a few design tweaks I will outline once we start. Core changes • Adjust the room and wall dimensions where noted. • Insert updated descriptive notes/quotes throughout the drawings. • Refresh selected design elements to match our current concept while keeping the overall construction system (wood structure, straw infill) intact. Required set for every model • Clean, clearly dimensioned floor plan at proper architectural scale. • Two full building sections that show structure, i...

Design engineer with commercial refrigerated storage required - co2 systems

Confirmis () is a Singapore-based business information provider specializing in connecting businesses with global capabilities; comprised of industry veterans, Confirmis's business model is designed to overcome perennial lack of data (let alone quality data) to support effective decision-making, particularly in developing economies. As a Site Verifier, you will be responsible for verifying a residence existence through visual data by conducting a site visit to ensure that we provide reliable and accurate information to our client. JOB DESCRIPTION: • Take pictures of the residence and its vicinity per Confirmis’ standard operating guidelines. • Take picture of the surrounding area and provide observation about the residence REQUIREMENTS: • Must be living in (or ...

I need engineered drawings for a custom designed infinity pool in South Carolina that will need to be stamped to meet local code. The design should include: -CMU block construction - Equipment room - Tanning ledge -Design drawings attached Ideal skills and experience: -Structural, electrical and plumbing - Expertise in infinity pool design - Knowledge of South Carolina building regulations - Experience with custom pool features

Por favor, regístrate o inicia sesión para ver los detalles.

Por favor, regístrate o inicia sesión para ver los detalles.

My house’s first floor is standing unfinished and I want it fully closed in and ready for the next trades. The core work still pending is: • Bricklaying for the remaining external and internal walls • Complete plastering on all newly built surfaces • Installation of the specified windows and doors once the openings are set All bricks, mortar, plaster, windows, and doors are already stored on-site, so there is no material procurement required—just skilled labour with the right tools. I only have rough sketches at the moment, so I need a professional who can read what is there, advise where details are missing, and then execute the build accurately in line with local construction standards. We will walk the site together, agree on measurements and phasing, a...

I am looking for an experienced Structural/Mechanical Engineer to design a robust, high-performance solar pergola to be installed on a flat roof in Tripoli, Greece. This is a high-wind and snow-load area (altitude 650m), so structural integrity is the top priority. The Concept: A Triple-Tilt BIPV (Building Integrated Photovoltaic) structure designed to maximize winter yield and provide a shaded outdoor space. The structure will support 24 Huasun Himalaya HJT Bifacial Panels (approx. 450W-460W each). Key Specifications: Total Dimensions: 6.00m (Width) x 6.50m (Depth/Length). (about) Panel Dimensions: 1722mm x 1134mm x 30mm (~22kg each). Structure Material: Steel (IPE longitudinal rafters, RHS columns), hot-dip galvanized. Geometries (Triple-Tilt): Main Body: 15 Panels (3 rows of 5) at...

I need a structural engineer to design a workshop and living quarters. The structures will primarily use steel and wood. Key Requirements: - Design new structures from scratch - Expertise in steel and wood construction Ideal Skills: - Structural engineering degree - Experience with steel and wood designs - Strong design software proficiency (AutoCAD, Revit, etc.) - Ability to create safe, functional, and innovative designs Please share past relevant projects in your bid.

Confirmis () is a Singapore-based business information provider specializing in connecting businesses with global capabilities; comprised of industry veterans, Confirmis's business model is designed to overcome perennial lack of data (let alone quality data) to support effective decision-making, particularly in developing economies. As a Site Verifier, you will be responsible for verifying a residence existence through visual data by conducting a site visit to ensure that we provide reliable and accurate information to our client. JOB DESCRIPTION: • Take pictures of the residence and its vicinity per Confirmis’ standard operating guidelines. • Take picture of the surrounding area and provide observation about the residence REQUIREMENTS: • Must be living in (or ...

I need a professional to determine if an interior wall in my residential home is load-bearing. The wall currently serves as a partition between rooms, but I'm unsure of its structural role. Key tasks: - Inspect the wall and surrounding structure - Provide a professional opinion on whether the wall is load-bearing - Issue a certificate for verification Ideal skills and experience: - Structural engineering background - Experience with residential properties - Ability to provide official certification

Industrial Product Designer & Engineering Team Needed for Revolutionary Modular Steel Building System Project Description We are seeking experienced Industrial Product Designers, Mechanical Engineers, Structural Engineers, CAD Designers, and Product Development Specialists to help complete the design and commercialization of an innovative modular steel building system called STEEL ONE Metal Block. About the Invention STEEL ONE Metal Block is a patented-pending modular steel-based construction system designed to dramatically reduce residential and commercial building construction time. The system consists of prefabricated interlocking steel blocks that can be assembled rapidly, potentially allowing a standard home structure to be erected within one to two weeks by a s...

I need an experienced MEP engineer, licensed by the state of Tennessee, for a small commercial brewery project. The project is a renovation within a former bar. The client is an experienced brew master. This will be his second location and requires little to no help with the brew system. The job includes mechanical, electrical, and plumbing services. Key requirements: - Mechanical: - HVAC design - Ventilation (as needed) - Electrical: - Lighting systems - Power distribution - Plumbing services are also required Ideal skills and experience: - Proven experience in MEP design for commercial breweries or similar facilities. - Strong knowledge of HVAC, piping, and electrical systems. - Ability to create efficient and compliant designs. - Familiarity with industry regulations and s...