Cisco Jobs

I need an expert and engineer who can design, deploy, and validate resilient, high-throughput, time-synchronized SDR transport over Peplink/SD-WAN to a multi-static fusion center. SD-WAN / Peplink: SpeedFusion bonding, hot failover, WAN smoothing, FusionHub, InControl 2. Topology Design: Hub-and-spoke/mesh SD-WAN for many SDR sites to NOC fusion center. Routing / Switching: BGP, OSPF, policy-based routing, VLANs, multicast. Security: IPsec VPN, firewalls, zero-trust transport for SDR/IQ data. QoS: DSCP, queuing, shaping/policing for time-sensitive radar/SDR traffic. High Throughput: 10/40/100G Ethernet, jumbo frames, TCP/UDP tuning, NIC offload. Timing / Sync: IEEE 1588 PTP, SyncE, White Rabbit; latency symmetry and time-error budgets. RF / SDR Awareness: IQ data rates, coherent multi-sta...

I need a hands-on engineer to install and fully configure a Sophos XGS 118 at our site in RITMAY BUILDERS, Ansal Villa, Satbari Road, New Delhi 110074. Both Jio and Airtel technicians are already scheduled, so you will be able to plug straight into their hand-offs and build a clean fail-over between the two uplinks. The job covers everything from mounting the appliance to finishing live traffic tests: • Physically install and cable the XGS 118 • Create dual-WAN with automatic fail-over (Jio / Airtel) • Design and apply LAN and VLAN structure • Build firewall rules, NAT, and routing that match our current network plan • Coordinate on-site with the ISP crews plus the CCTV and Lutron automation teams to ensure their remote-access requirements are met &bull...

STRICT RULES - READ BEFORE BIDDING 1. NO BEGINNERS & NO EXPERIMENTS: If you are a beginner or looking to "experiment" and figure things out on the go, your bid will be REJECTED. You must have proven, hands-on experience with ALL of these specific devices: Cudy P2 5G Router DrayTek Vigor 2915 Router Yeastar S20 PBX We are a live production business, NOT a testing ground. If you have not actively worked with these exact models inside out, DO NOT BID. 2. THE CORE AUTOMATION GOAL (MANDATORY): We demand a 100% seamless, automated experience for the end-user. Moving in and out of the KSA office must require ZERO manual network adjustments. 3. STRICTLY ANYDESK OR ULTRAVIEWER ONLY: ALL work MUST be done remotely via AnyDesk or UltraViewer on my machine. No direct a...

We are looking for a Robotics Technical Support Specialist to support a space robotics project from November 2026 through December 2027. This is a full-time contract role, Monday-Friday, 9:00 AM-5:00 PM Central Time. The ideal candidate has a strong software background and experience troubleshooting robotics or technical software environments, particularly Linux/Ubuntu, Docker, and ideally ROS 2. Responsibilities: Troubleshoot software, Linux/Ubuntu environments, and containerized workflows. Diagnose issues, identify root causes, and provide practical technical solutions. Support Docker and Docker Compose workflows. Troubleshoot system, driver, configuration, and integration issues. Work closely with robotics engineers and document solutions as needed. Requirements: Master’s...

STRICT RULES - READ BEFORE BIDDING 1. NO BEGINNERS & NO EXPERIMENTS: If you are a beginner or looking to "experiment" and figure things out on the go, your bid will be REJECTED. You must have proven, hands-on experience with ALL of these specific devices: Cudy P2 5G Router DrayTek Vigor 2915 Router Yeastar S20 PBX We are a live production business, NOT a testing ground. If you have not actively worked with these exact models inside out, DO NOT BID. 2. THE CORE AUTOMATION GOAL (MANDATORY): We demand a 100% seamless, automated experience for the end-user. Moving in and out of the KSA office must require ZERO manual network adjustments. 3. STRICTLY ANYDESK OR ULTRAVIEWER ONLY: ALL work MUST be done remotely via AnyDesk or UltraViewer on my machine. No direct a...

Dinstar UC2000-VE-4T + FreePBX/Asterisk + Retell AI Voice Setup Project Description We are looking for an experienced individual VoIP/Asterisk freelancer to configure a small business telephone system. Hardware available: Dinstar UC2000-VE-4T LTE/VoLTE Gateway 2 mobile SIM cards initially 4 available gateway channels Required configuration: Install and configure FreePBX/Asterisk Configure the Dinstar UC2000-VE-4T with 2 SIM cards Create two completely independent inbound/outbound call routes Configure two remote SIP softphone users working from PCs/mobile phones Each user must make and receive calls through their assigned SIM/number Incoming caller ID should be passed correctly to the remote user Configure correct outbound routing so each user always calls through their assi...

I am rolling out a new IP-based CCTV network that must protect both indoor and outdoor areas of our facility. The job begins with a full site survey—virtual walk-throughs and existing floor plans are available—to map optimal camera positions, cabling routes, and NVR locations. Because the entire backbone will run on Ethernet, you will need to size and specify PoE switches, storage capacity, and any wireless bridges needed for hard-to-reach exterior zones. Once the bill of materials is approved, I expect you to handle or oversee physical installation, perform all network configuration (subnetting, VLANs, port-forwarding for secure remote viewing), and fine-tune the VMS so live and archived footage streams smoothly from every camera. Acceptance criteria • Complete cove...

I am rolling out FortiNAC across a 40-user environment and need an experienced hand to configure it so we immediately raise our security posture. The main objective is crystal clear: enhance overall network security. Here is what I need achieved: • Build and refine access-control policies that automatically grant or deny connectivity based on user role and device posture. • Segment the network so that computers and laptops, mobile devices, and a growing mix of IoT equipment each sit in the right security zone with least-privilege access. • Complete the full FortiNAC setup: appliance or VM provisioning, switch/WLAN integration, 802.1X configuration, guest onboarding, and testing of enforcement actions. • Provide concise documentation and a quick-reference guide...

Cisco ASA working through ASDM to tidy up and optimize my current firewall pair. The firewalls are already in active-standby high-availability mode, and we use SSL VPN for remote access. Here is what I want done: • Audit existing Access Rule, NAT rule and Service-Policy, rename them, group them logically, and delete anything that is redundant or obsolete. Environment SSL VPN to connect to LAN (working) Internal servers accessible from out for website (2)-working CCTV to be accessible from outside-working Cloud subnet accessible from LAN and VPN subnets for RDP (not working) Confirm two ASA in HA mode (active-standby) Recommend any improvements This is production ASA, so credentials cannot be shared, need to work via shared screen