Ethernet bootloader microchiptrabajos

Filtro

Mis búsquedas recientes
Filtrar por:
Presupuesto
a
a
a
Tipo
Habilidades
Idiomas
    Estado del trabajo
    4,566 ethernet bootloader microchip trabajados encontrados, precios en USD

    I currently have boot loader hex files for many PIC 16F and 18F micro-controllers. I will burn the hex files on a small controller I have using hardware programmer The program that is supplied with the boot loader that allows simple 3 wire serial download of user programs is copyrighted and I cannot distribute it with my controllers. I have the actual boot loader hex files, I need someone to write...

    $240 (Avg Bid)
    $240 Oferta Promedio
    4 ofertas
    PIC output sequencer Finalizado left

    Write a small program to sequence the outputs of a PIC Micro. - Must be written in assembler compatible with Microchip compiler. (Other development platforms may be considered on developers recommendation.) - Sequence as follows... 1) GP0 turns on 2) After predetermined time "WARMUP" GP1 turns ON 3) After predetermined time "READTIME" both outputs turn

    $56 (Avg Bid)
    $56 Oferta Promedio
    10 ofertas

    We want to patch VMware so that it allows any MAC address to be used. We need this for compatibility with an existi...[iniciar sesión para ver URL] Use a MAC address that is outside of the range 00:50:56:XX:YY:ZZ. Then, when you start VMware, it will not say "00:02:B4:9A:44:E1 is not an allowed Ethernet address. Invalid MAC address specified."

    $70 (Avg Bid)
    $70 Oferta Promedio
    1 ofertas

    ...standard Linksys upgradeable AP's. I would like the AP to receive all 802.11 packets on a configurable channel and transmit them via Ethernet. The 802.11 frame will probably have to be encapsulated in Ethernet so it can be sent to a remote destination but then viewed. The eventual output would be to a .dmp file for WireShark, Omnipeek, Air Magnet

    $1103 (Avg Bid)
    Destacado
    $1103 Oferta Promedio
    7 ofertas

    ...shared via remote using FM, internally. I need to set it up to share it outside the office too. Configuration: Dedicated Apple G4 computer - using Apple Server 10.3, using Ethernet DHCP. Connected through the internet via a Cable modem, connected to a cable router, connected to a patch panel using Cat5e Dedicated Apple G4 computer, installed with FM

    $65 (Avg Bid)
    $65 Oferta Promedio
    4 ofertas

    Download from Microchip web site the TCP/IP stack and porting it to earlier chip PIC18F452. Download the C compiler and assembler also from Microchip web site. Microchip freely download TCP/IP library has change beyond its earlier design that supports 18F452 chip with RealTek ethernet controller. The version 1 and version 2 support 18F452 chip. The

    $147 (Avg Bid)
    $147 Oferta Promedio
    1 ofertas

    ...connects Unit 3 to 4 Links 5 and possibly 6 connect the Gateway Node to the network. The distance between every unit is 400metres where the LAN based solution is deployed using Ethernet. ## Deliverables You need to solve these two problems Problem 1::: Develop * A high quality video link between the unit 1 and Unit 2 (vid1 in both directions) * A medium

    $62 (Avg Bid)
    $62 Oferta Promedio
    3 ofertas

    Microchip PIC GSM terminal controller you must be familiar with microchip PIC and GSM terminals befor you bid for this project 1. The main goal of this project is to create an easy interface for gsm terminals, like Siemens tc35, mc35, mc45,telit 863, telit 864 ect. using a simple serial protocol for controlling the terminal feature. 2. Hardware of this

    $85 (Avg Bid)
    $85 Oferta Promedio
    2 ofertas

    ...have much knowledge in PCB layout so I need someone who knows what they are doing. The PCB is a I/O board connected to a SBC PC from Kontron. They I/O board has VGA, USB 2.0, Ethernet, Serial and Audio. I know what needs to be modified but will be happy for any further design modificataions to the PCB for better functionality. The job will include changes

    $325 (Avg Bid)
    $325 Oferta Promedio
    11 ofertas

    Por favor, regístrate o inicia sesión para ver los detalles.

    Destacado Sellado

    ...location of the file during recording should be settable using command line or just ">" to stdout. The disk drive could be local SATA attached drive or a drive on the gigabit Ethernet network. Code deliver format: Linux tar file. The recorded video file is then put in a directory to be streamed using Apple's Darwin Streaming server File also Playable

    $552 (Avg Bid)
    $552 Oferta Promedio
    4 ofertas
    WI-FI setup Finalizado left

    ...and what I have been able to discern on the internet only address connecting the wireless router DIRECTLY to the modem, which I don't want to do. My home is wired for ethernet which I still want to use and I want to connect the wireless router to one of the internet ports. With the wireless router properly installed I want remotely connect

    $38 (Avg Bid)
    $38 Oferta Promedio
    5 ofertas

    Hello ! I need a simple application done for a PIC18FXXX. If you don't know what a PIC is, then don't bid. If you never heard of Microchip, don't bid. If you never used MPLAB, don't bid I know very good what i need and it is something very simple. A very close application can be found here : [iniciar sesión para ver URL]

    PHP
    $103 (Avg Bid)
    $103 Oferta Promedio
    8 ofertas

    ...able to run from a central server and be simultaneously accessed by no more than ten client systems. They will be running XP and Office 2003 and the stock system via Wired Ethernet and Wireless 802.11b/g. The model will bring waste in to a site via the weighbridge; the chemists will check the contents of the load and decide whether or not it is acceptable

    $1880 (Avg Bid)
    $1880 Oferta Promedio
    15 ofertas
    TCP/IP Activex or DLL Finalizado left

    ...much faster. Our typical situation is to send or receive single files that are hundreds of megabytes to hundreds of gigabytes in size, uusally over a LAN with gigabit ethernet connections. If all you are doing is calling Winsock, it probably won't be fast enough. Please submit your compiled exe to demonstrate your speed between two PCs

    $1147 (Avg Bid)
    $1147 Oferta Promedio
    6 ofertas

    ...ON, ETC. THE DESIGN IS MADE BY MICROCONTROLLER OF MICROCHIP dsPIC30F2010/1010 FAMILY WITH DSP SINE WAVE OUTPU, THIS IS OPEN PROJECT NO HARDWARE NO SOFTWARE LIMITATION LIKE A NEW PROJECT YOU CHOOSE YOUR SELF ALL THE COMPONENTS WITH TRANSFORMER WINDING BUT THE MICROCONTROLLER IS SPECIFIC OF MICROCHIP dSPIC30F2010/1010 ONLY THIS IS THE BOUNDADATION OF

    $189 (Avg Bid)
    $189 Oferta Promedio
    2 ofertas

    NetTrek have a need to be able to restrict internet access to a group of computers, which are networked via ethernet and also via wireless. Internet access is only to be granted via dynamic passwords issued by a manager; these passwords must be able to expire after any set length of time, if required. This would be a similar system to that found

    $501 (Avg Bid)
    $501 Oferta Promedio
    19 ofertas
    Bootstrap browser Finalizado left

    ...should be able to boot at least 90% of pc's 2 years older or newer. I would believe that one of the challenges with this component would be including a wide range of current ethernet drivers on the cd, and would be able to include newer versions of those drivers in the future. Component 2: After the bootable cd starts the pc and connects to the

    $899 (Avg Bid)
    $899 Oferta Promedio
    5 ofertas

    ...able to run from a central server and be simultaneously accessed by no more than ten client systems. They will be running XP and Office 2003 and the stock system via Wired Ethernet and Wireless 802.11b/g. The model will bring waste in to a site via the weighbridge; the chemists will check the contents of the load and decide whether or not it is acceptable

    $500 - $5000
    $500 - $5000
    0 ofertas
    Ethernet simulator Finalizado left

    Below is the URL where you can find full description of the project. [iniciar sesión para ver URL] ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliverables): a) For web sites or other server-side d...

    $30 - $120
    $30 - $120
    0 ofertas

    ...colours will be given on request). The diagrams we require are as follows: 1. Network Overview 2. VPS/VDS 3. Colocation 4. Leased Line 5. DSL 6. Dedicated Servers 7. IP Transit (Ethernet Services) Copyrighted artwork/images are not to be used in this project unless license is explicitly granted to us for its use. We will own any artwork produced and this must

    PHP
    $548 (Avg Bid)
    $548 Oferta Promedio
    21 ofertas
    Multimedia Server Finalizado left

    ...clients and the normal range of standard codecs. - Link to ENUM - The billing engine must support Real Time reconciliation. - Installed on the edge of a global private Ethernet IPv6 network - Provisioning of different kind of end-points (VoIP phone, [iniciar sesión para ver URL] box, Internet connection for Data etc. - Prepaid with default Credit card charge when reach

    $1500 - $5000
    Destacado Sellado
    $1500 - $5000
    7 ofertas
    chaoS fgpa encryption Finalizado left

    ...between 2 fpga's - communication block between computer and fpga fpga1 is connected to pc1 and fpga2 is connected to pc2. fpga1 and fpga2 are connected between them using ethernet, serial, usb (your choice) User1 sends from pc1 to fpga1 a plain text, fpga1 encrypts the text and send the cipher text to fpga2, fpga2 decrypts the cipher and send it to

    $255 (Avg Bid)
    $255 Oferta Promedio
    1 ofertas

    ...between 2 fpga's - communication block between computer and fpga fpga1 is connected to pc1 and fpga2 is connected to pc2. fpga1 and fpga2 are connected between them using ethernet, serial, usb (your choice) User1 sends from pc1 to fpga1 a plain text, fpga1 encrypts the text and send the cipher text to fpga2, fpga2 decrypts the cipher and send it to

    $30 - $200
    $30 - $200
    0 ofertas

    Download from Microchip web site the TCP/IP stack and porting it to earlier chip PIC18F452. Download the C compiler and assembler also from Microchip web site. Microchip freely download TCP/IP library has change beyond its earlier design that supports 18F452 chip with RealTek ethernet controller. The version 1 and version 2 support 18F452 chip. The

    $85 (Avg Bid)
    $85 Oferta Promedio
    1 ofertas

    ...in one data stream. We have implemented a solution on Linux using the following setup: 1. Using vtun to create Ethernet tunnels over the ppp links from the host to our own server. 2. Bonding these Ethernet devices together using Linux Ethernet bonding. 3. Assigning an IP address to the bonded devices on each end of the link and manipulating the routing

    PHP
    $500 - $1000
    $500 - $1000
    0 ofertas
    Logo for Teel Networks Finalizado left

    ...left and the ethernet cable will run into some computers on the right or something cool like that. If you want to some how incorporate gif into the banner feel free. The banner and logo will go here [[iniciar sesión para ver URL]][1] I will require the source files for editing. YOU MUST SUBMIT A PREVIEW OF SOME TEXT WITH THE ETHERNET CABLE LOOK WITH

    $84 (Avg Bid)
    $84 Oferta Promedio
    13 ofertas

    ...to have a simple verifcation program to run on the PIC that shows any data to and from the FRAM and indicates pass/fail using one LED. see [iniciar sesión para ver URL] ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must

    $30 - $5000
    $30 - $5000
    0 ofertas

    Categories: microsoft windows, language specific, c++/c, computer platforms, embedded systems, usb,ethernet,hardware Description: I need to integrate a RNDIS to my firmware of the usb device. the firmware will be avilable when needed. at the moment the devic needs to work under win [iniciar sesión para ver URL] firmware is implemented in C with AVR studio 4.12 but

    $500 - $1200
    $500 - $1200
    0 ofertas

    ...and he need to know if Xbox could be configured for his LCD TV resolution. 2. He wants to upgrade HD to 500GB 3. How to backup new games on HD from DVDs/Internet. 4. Xbox is ethernet enabled, Is it possible to upload linux OS on it and hook it to internet? ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well

    $21 (Avg Bid)
    $21 Oferta Promedio
    1 ofertas

    ...2 different carriers). BGP is running with a simple configuration, which works fine; I do not need anything added to the BGP configuration (it's the most basic 2-Serial/2-Ethernet/BGP config setup in about 20 config lines, which is all we need for this part of the config). I'd like to add some a few extra tweaks, such as adding OER (Optimized Edge Routing)

    $85 (Avg Bid)
    $85 Oferta Promedio
    1 ofertas

    ...used on a single tablet pc with a gprs connection and ethernet connection as a backup. The application will need to be able to look up all stock in a particular stock location and adjust stock levels. Then synchronise with the live database when the tablet is connected over gprs or ethernet. The application will need to be easy to use with

    $30 - $5000
    $30 - $5000
    0 ofertas
    6103 Linux i dyski Finalizado left

    ...VIA Technologies, Inc. VT8235 PCI Bridge 0000:00:09.0 Communication controller: Motorola: Unknown device 5608 0000:00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:00:0c.0 RAID bus controller: Silicon Image

    $44 (Avg Bid)
    $44 Oferta Promedio
    1 ofertas
    Embedded Linux for ARM Finalizado left

    ...removes. Basically, due to time constraint, we want the code/firmware to capture all incoming packets from UART1, UART2, UART3, USB1, USB2, Ethernet, & Keypad. Drivers for UART1, UART2, UART3, USB1, USB2, & Ethernet are located in the kernel. Drivers for the Keypad & 3 push bottoms switch needs to be written. Our engineers write the codes to reply to

    $548 (Avg Bid)
    $548 Oferta Promedio
    2 ofertas

    ...Flash Media Server. The server would take the live FLV stream from the encoder AND a metadata or cue stream from an external source. That source may come from a serial port or ethernet socket connection. That data would be embedded live into the FLV stream and then be made available to pass on to FLV viewers AND recorded to a file on the Flash Media Server

    $30 - $100
    $30 - $100
    0 ofertas

    ...goal of this RAC project is to develop a "real-time dashboard" that graphically displays the status of two types of network devices. One is a storage array. The other is an Ethernet switch. Once implemented, this real-time dashboard, based on Adobe Flash and accessible through a web browser, should show an IT administrator the status of the device without

    $194 (Avg Bid)
    $194 Oferta Promedio
    3 ofertas

    This is a simple inventory application which will run on a Windows Mobile 5.0 device, e.g. HP HX2490 PDA device with Wireless ethernet connection to a SQL Server 2000 sitting on LAN. The user would logon, with credentials verified from SQL server. The application has about 10 fields to enter information about inventory from drop down boxes and text

    $76 (Avg Bid)
    $76 Oferta Promedio
    13 ofertas

    Hi, I have a microchip (ATtiny2313) thats was programmed to accept inputs from a standard ps/2 keyboard . Now i want these inputs to come from a device that outputs TTL data this device [iniciar sesión para ver URL] . So i need a programmer who knows assembler who can take a look at the source code of the program and make

    $72 (Avg Bid)
    $72 Oferta Promedio
    2 ofertas

    Hi, I have a microchip (ATtiny2313) thats was programmed to accept inputs from a standard ps/2 keyboard (keyboard wedge). Now i want these inputs to come from a device that outputs TTL data instead of the keyboard. So i need a programmer who knows assembler who can take a look at the source code of the program and make the necessary changes. thats it

    $705 (Avg Bid)
    $705 Oferta Promedio
    2 ofertas
    Wattmeter Finalizado left

    ...display will normally show the cumulative kWh reading (from the last time the reset button was pressed) and the current instantaneous wattage. The meter will also have an Ethernet interface which provides a basic web page displaying the current readings and allow the cumulative reading to be reset and for the relay to be toggled on and off. We will

    $1157 (Avg Bid)
    $1157 Oferta Promedio
    7 ofertas

    ...user and LOM port or Ethernet Hme1 b. Completely configure Webmin with SSL login c. Completely configure Usermin d. Completely configure Virtualmin 2. Connect to second Netra T1 via serial port b to LOM port of 2nd box for management and vice versa for the new box 3. Possible configuration to cross the HME1 ports (ethernet 1) between the two boxes

    N/A
    Destacado
    N/A
    0 ofertas

    ... * The Satellite Controller has the following resources: - Processor: DS80C400 - Memory FLASH, 1 Megabyte - Memory SRAM, 1 Megabyte - RS232 (3) - RS485 (1) - Ethernet Controller & Translator - Buzzer - LED's on Port Bits (2) - A/D 8- Channels, TI TLV1548QDBRQ1 - Digital Inputs on Port bits (2) - Digital Outputs on Port bits (2)

    $531 (Avg Bid)
    $531 Oferta Promedio
    4 ofertas
    Print Queue Manager Finalizado left

    ...system we are building. We wish to start with the most basic functionality we need and add more functionality later. An external data source will be sending a data stream over Ethernet to a Windows XP workstation. This data will consist of CSV records. Each record is a print job. The Print Queue Manager will receive the data, add it to the queue, and as

    $862 (Avg Bid)
    $862 Oferta Promedio
    7 ofertas

    ...possible. Functions tested must include CD disc read, DVD disk read, RAM test, memory card test (simple single sector read and write). Desired checks include VNU units, ethernet port, ROM CRC check. Results of tests to be displayed on screen. No Sony libs to be used ps2lib or other homebrew library is acceptable. Deliverables are source code and ELF

    $5000 - $10000
    $5000 - $10000
    0 ofertas

    My new computer language developed by a student in VB.Net needs a mouse input command and simple communication I/O with custom peripherals via Ethernet or USB ports. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run

    PHP
    $85 (Avg Bid)
    $85 Oferta Promedio
    1 ofertas

    This project is to design a PCB for Microchip PIC 8pin and 14pin Microcontrollers. Requirements: 1)60mmx90mm two Layer PCB with Solder Mask and Silkscreen; 2)Protel 99SE SCH diagram and pcb file ready for production; 3)Development board datasheet and user manual; 3)To test the design on a real circuit to make sure everything is working as expected.

    PHP
    $131 (Avg Bid)
    $131 Oferta Promedio
    6 ofertas

    *** This bid has been put on hold for 2 weeks and the delivery deadline extended to at least 6/15/2007 *** Please ...(also known as a eBox-2300). For development, Buyer will provide the SBC configured with a GNU C/C++ compiler and a DAS for generating test data. SBC supports X-windows & ethernet. This is an embedded application with no user interface.

    $850 (Avg Bid)
    $850 Oferta Promedio
    1 ofertas

    We have a 3640 (ios 12.3, 5 ethernet ports) that we bought to route from both a DSL line (with netopia router) and an affiliate's LAN. We have PCs, servers, and phones. I want the router to handle DHCP for the PCs and phones. The LAN, DSL and servers will all have fixed IP addresses. DSL router is 10.6..6.1 [iniciar sesión para ver URL] LAN ip address

    $181 (Avg Bid)
    $181 Oferta Promedio
    4 ofertas