Ethernet bootloader microchiptrabajos

need an electrial floorplan designed for a new house contruction. lighting, ethernet, camera etc

We are looking for a Philippines based appointment setting telemarketer for a janitorial company in Vancouver, BC Canada. Training Provided. We work from Monday to Friday 9:00 am to 5:00 pm Pacific Standard Time (GMT-8) (1:00AM - 9:00AM Manila Time) You will work from home. Requirements: -Computer. Wired Ethernet Not Wifi -Quality Headset. -Good Quality Internet Connection (preferably PLDT) -Quiet Environment. Salary Base Pay + Commission Base pay is $2.00 / Hour CAD ($348.00 / Month CAD) + Commission (Base Pay 13240 PHP / Month + Commission) Please answer the following questions: How many days per week are you available? What are the specs of your computer? Are you using a laptop or desktop computer? Who is your internet provider? Are you looking for long term or short ...

Stm32 Gui and bootloader also support for LEDs and MAX on stm32f103vet6

1) Small board 2.3inch x 1.0inch 2) 24VDC Input , Power status LED, Reverse Polarity Protection 3) ATMEGA64M1-15AD CPU 4) RS485 Driver, activity LED 5) CAN Driver/Trans-receiver , activity LED 6) A bootloader/programming connector JTAG etc based on any reference design

...remote location. Unfortunately, the software that's required to manage this equipment will NOT work with Virtual Com Ports, it requires a physical FTDI FT232RL connected to my Windows laptop. To further clarify, the software itself does not allow me to choose virtual ports, it ONLY allows me to choose actual FT232RL hardware that's physically connected via USB. I've tried all the various "RS485->Ethernet" software bundles out there, but none of them work because they create Virtual Com Ports, which the software doesn't support. My thought was if I could emulate an FT232RL so Windows *thinks* there's one connected, and then use software to link it to TCP/IP, it might work. Any suggestions? I've also tried plugging an FT232RL into my lapto...

...remote location. Unfortunately, the software that's required to manage this equipment will NOT work with Virtual Com Ports, it requires a physical FTDI FT232RL connected to my Windows laptop. To further clarify, the software itself does not allow me to choose virtual ports, it ONLY allows me to choose actual FT232RL hardware that's physically connected via USB. I've tried all the various "RS485->Ethernet" software bundles out there, but none of them work because they create Virtual Com Ports, which the software doesn't support. My thought was if I could emulate an FT232RL so Windows *thinks* there's one connected, and then use software to link it to TCP/IP, it might work. Any suggestions? I've also tried plugging an FT232RL into my lapto...

I have a Lenovo Ideapad 510-15ikb Catalina 10.15.3 installed on. Laptop Specs: i5-7200U Intel 620 (sees as 3GB RAM, increase it to 4GB if possible + G940MX (I don't except Nvidia to work) 8GB DDR4 Everything is working fine except: 1- Laptop keyboard works at startup but after an amount of time...it stops working. I have to connect external keyboard to type. This needs to be fixed. FN+Space turn on/off backlit fine but screen brightness doesnt work) 2- Trackpad doesn't work. I have to connect usb mouse to control. This needs to be fixed. 3- No Sound. Sound needs to be fixed. 4- Battery: remains 100% all the time, doesn't update. These are 4 major problems that needs to be fixed asap. Ethernet and Wireless (usb) is working. I will open up teamviewer or anydesk de...

Porting 16KB program from a Motorola MC6HCO5 to a Microchip PIC24FJ128GC010 or similar. This instrument measures the output of a pressure sensor and two temperature sensors and drives a seven segment LCD array and BLE serial output. Expect 25 year old code would be converted to and edited in Linux.

I have Ubuntu 18.04 already installed on my external HDD and I want to install GRUB bootloader to it so I can boot it from every PC that have UEFI supported. Now I can boot only from PC that have grub installed

We need to build a mo...will consist of several interconnected circuit boards each serving a functional purpose: PSU board. This board distributes input 24V/48V power from battery to the microcontroller and daughter boards. MCU board. The MCU boards includes STM32F767ZIT microcontroller. The board shall also include an ethernet port. The ethernet port will host an EtherCAT master. RS485 board. A board equipped with two UART to RS485 transceivers. BeagleBone cape board or BeagleBone board using chip from should have EtherNet port for TCP/IP The board stack is similar to Arduino shields, it differs in the following ways: Each daughter board uses cables to connect the signals, and a pin header to supply power. We will use board houses such as JLCPCB or seedstudio We de...

We require an expert to bond interfaces of Mikrotik router with OpenWrt firmware in 3 days. The OpenWrt firmware is already installed, and the interfaces are picked up and the load balancing is working perfectly on RBM33G Mikrotik(which has OpenWrt OS) with two Quectel LTE-A cards, and we need to bond the router interfaces together and route all the traffic to one Ethernet. We may also need to do the same thing with other Mikrotik router-boards as well in the future, so we need to know how to configure that router for the layer 2 bonding. The purpose of that bonding is to have a fast and reliable layer 2 connections between 2 sides. We need a Layer 2 bonding which bond all interfaces through a VPN connection (each interface split the VPN connections) to another server (could be Cent...

I have an ATMega32M1 chip already integrated into a hardware design that I require code written for. The device basically takes the voltages on each of the input pins and broadcasts that voltage value via CANbus, while also setting the status of its output pins based on a CANbus pack...requirements. Sample the Analog Inputs at a high frequency. Switch the outputs at a high frequency based on the incoming CAN packet. Transmit the values and pin statuses via CAN packets at a specific frequency. Be easily editable so I can customize the CAN frames and I/O configuration. I do not require a bootloader at this point, I will write directly to the chip as the device does not need to be field programmable. However, this may change in the future so there may be scope for a bootloader ...

...This can be upgraded in seconds with one click in the webhost's control panel, but it may cause some files to not work. If that happens, those files would obviously need to be fixed. We are willing to pay a generous US$250.00 for the above tasks. Everything to be done within one week of hiring you please. No excuses you have suddenly decided to go on holiday, fallen ill, your dog chewed your ethernet wire etc. If the virus reappears we would expect a refund as the work wasn't done properly and to our specifications. If you do this work reliably, promptly and to a very high standard, we will pay you a bonus amount. We will also have plenty more Joomla work available for you paying at a good rate. Please provide full details of the expertise you have with (a) Jooml...

We need a modified opriboot bootloader (source file ()) that can be compiled and uploaded to the corresonding ICs giving the ability of a key that will be locked with the main program and one external memory. For more information the bootloader has to contain a key that will be confirmed in the main program and the bootloader has to contain a parameter according the unique ID () .

I need an Android app. I already have a design for it, I just need it to be built. The plc controller to be communicated with a 24inch android touch system over Ethernet communication. We have the screens to be developed but you need to develop in android.

A bootloader that must be loaded to a vehicle PCM running a MPC5XX so that the flash chip can be updated. The bootloader is loaded into RAM and then executed. Bootloader must be able to read/write CAN bus frames, read/write external flashchip and must be able to follow CAN message flow control specs when receiving and send large CAN frames. Candidate must be fluent in Power PC Assembly to design the bootloader from scratch which must be compiled to a binary file which can be executed from RAM.

I need a person experienced with coding for STM32H7 microcontroller, possibly for long term cooperation. You need to have code examples to do with ADC and Ethernet, and Nucleo-H743 board for testing.

Por favor, regístrate o inicia sesión para ver los detalles.

Build a program to discover and register ip cameras and DVR cams in Local Network into a file. The program should run into a Raspberry or similar with ethernet LAN entry. This program should be launched when ethernet interface is up and every time the device is joined to the local network. This program have two setup files must be considered, one contains a list with default factory URLS cam and credentials () and the other (#MAC-ADDRESS#) contains alternative credentials. Both setup files, factory and custom setup files, are going to be updated by API when this program is launched ( with the program parameter 1). The output file must be named as Raspeberry’s Mac address with json format. The output of program should have a file with the ip camera identifier, url

I need a schematic review and component optimization for a circuitry I designed. The board features a PoE+ connection, Ethernet Phy, battery charger, battery gauge and protection, microcontroller, Buck converter, and LDO. It is powered by a 2s4p battery pack (Li-Ion) or PoE+. The battery pack is charged over PoE+. A block diagram can be found attached. The board has a high component count: >300 components whereas 150 of them are unique. The goal of the project is to perform a schematic review and optimize the schematic for costs and lower component count. Optimizations should include: - unifying of resistor and capacitor values - optimizing input/output capacitors for the converts - unifying MOSFETs - checking for cheaper alternatives for the most expensive parts Once the pr...

I need a cellphone application for a BMS that can display and control data sent via a RN-42 Bluetooth Module made by Microchip which gets data from a Microcontroller from Microchip Part Number PIC32MX130F128L-I/PT. I will need it to do many things which may not all be listed here but as an examples. I will need it to graphically display power in and out, current in and out, resistance, temperature, time, and voltage. I will also need it to control the cutoff voltage, a heater, a feature to locate the battery based on GPS and bluetooth maybe, a feature that only allows the battery to switch on when cellphone is within the vicinity that the user can turn on and off. This will have more feature than this but this is a good start. I can provide more in depth detail by putti...

I need a circuit which contains a microcontroller and which has ten optocoupled inputs and a precision of 1ppm Technical Data: -Microchip or Atmel controller -10 optocoupled inputs for normal switches -Input voltage: 12 Volt -RS232 Output -1ppm precision with TCXO or something like this. -2,54mm header for the connections (10 inputs, Power supply, RS232 signal) -Header for flashing the microcontroller Software: -An precise interrupt should be generated when one input is switched -Timestamp is generated and the following message is send through RS232: Number of input (1...9) / Timestamp -The last input should be used to reset the timestamp to zero -Timestamp is in milliseconds Design should be made with Eagle or Kicad and the software code should be provided as well from you.

I need a VHDL core for Lattice ECP5 FPGA (or other) that will send strings (just generic strings) over Ethernet with VSC8531-02 using RGMII. The interface would be RGMII on one side and RX/TX FIFOs on the other side.

I need somebody with tools and skills to perform some basic USB and Ethernet connection soldering directly on the board. This project is for LONDON ONLY. I will need to meet you in person to give you the boards that needs to be done.

I need an experienced developer who can create a tool, that runs on a raspberry PI or arduino. The tool should work as a virtual printer and catch the print jobs from a connected PC (USB or ethernet). It should work this way: There is a PC or another device, that is currently connected to a Printer directly via Ethernet or USB. Now, you connect the PC with the PI and the PI with the printer. The PC now should think, that he is still connected with the printer that was connected before. So if you send a printjob, the PI creates a PDF file and if set to true in the settings, print this document as well. It is important, that there shouldn't be changed anything on the PC. Then it should identify a user via NFC. If someone holds an NFC card to a connected NFC reader, it sh...

A controller with code to be able to drive 432x128 Display with P10 1/4 scan Display with 16x32 individual boards 12-bit PWM Application: Full Colour video display Format : Various video, images, animation formats Capable with audio output Input via Ethernet

Add a "Volume up" command in Fastboot library to unlock OEM Android 5.1. My device Volume Up button is not working, so want to send command from the keyboard while in bootloader fastboot screen mode.

...data over Ethernet to the host computer and the host computer will communicate directly to the device it is being connect to.   Data types to be transferred Ethernet Data Modbus TCP, Ethernet/IP, Modbus RTU, is the most used, so a simple bridge connection between the WIFI and hardwire output Straight USB/ micro USB from the host computer to the component being programmed so you need to send USB over WIFI ( Making the USB device visible on the client computer is required) Serial connection I connect a USB to serial converter cable to these devise so being able to adjust the comport in the device manager is required.     On the client computer I would like a simple program to be able to configure the hoist computer, EG change the IP address and sub...

I have ongoing work related to our previous project 'C/C++ template code for Windows PC to raspberry PI communication using Ethernet and TCP/IP'

We have Various models of POS machines like Verifone CX520 , Verifone VX520c , Igenico IWL255, Those POS's are provided to us by local banks for processing credit card payments. The POS's are configured to connect to the internet VIA 3G/4G SIM card's Data, What we need to do is to reprogram those machine's to connect to the internet VIA Ethernet instead of 3G/4G Internet. We need an engineer to reprogram the POS machines to be connected to the internet with different solution than the 3g/4g .

The Caterina open source bootloader will currently upload an Arduino sketch binary over the USB serial port. I need the bootloader modified to also allow the sketch binary uploaded over the hardware serial port Serial1, utilizing the same AVR109 protocol that is used over the USB serial port. The target device is the AprilBrother (now Aprilbeacon) Cactus WHID. It uses this version of the bootloader - - I will mail one Cactus WHID to the chosen candidate. Deliverables will include a zip or tar of everything necessary to create a git fork of the above project, sample binary, compile instructions and comply with same license. Let me know if any further information is desired. Modified device should exhibit and

We require an expert to bond interfaces of Mikrotik router with OpenWrt firmware. The OpenWrt firmware is already installed on RBM33G Mikrotik with two Quectel LTE-A cards, and we need to bond the router interfaces together and route all the traffic to one Ethernet. We may also need to do the same thing with other Mikrotik router-boards as well in the future.

a Arduino Due code to make the Ethernet shield work along with two Internal Cans for two CAN shield simultaneously. 2. Arduino code on Mega/UNO for Two independent SPI's (Not Master-Slave). 3. Arduino on mega/uno code for CAN shield and GPS/GSM module.

A Windows-PC and a raspberry PI can be connected over their Ethernet ports as master (PC) and slave (Raspi) executing several commands

1. INTRODUCTION The purpose of this document is to define the requirements for a firmware development of the live update system of our Advanced Control units. 2. PCB UNIT FW DEVELOPMENT Create a “pre-built” .hex file that allows to load Bootloader fw and application fw at the same time, using the “pickit” programmer tool 3. TFT CONTROLLER FW DEVELOPMENT New features to be added for “LIVE UPDATE MENU”: • when user inserts USB pendrive, must be detected and, if directory and upgrade files exists, automatically prompt the confirmation screen for upgrade process: • if all upgrade process finish correctly, then system must reboot automatically, without wait the user confirmation

Looking for skilled translators(Individuals not agencies) in the following languages: Amharic/Oromo(Native) <=> English(fluent) Somali(Native) <=> English(fluent) THIS IS HOME BASED INTERPRETING JOB. We work with clinics and hospitals, gas and electric companies, welfare, and social services offices, medical and auto insurance companies,...auto insurance companies, anything u can think of are now providing the interpretation services for almost all languages. When a client that doesn’t speak English come to any of these facilities, they call us on a 3-way call to assist 【Working Shift】 5 days a week(Mon-Fri) 8 hours shift while 7am - 7pm（Eastern Time-US) *4 hours shift is also allowed 【Need to prepare】 ・PC with stable internet (ethernet) connection ・USB Headset ...

Linux based, IoT Edge Gateway that can be used accross domains and is based on Open source software/firmware. Selection of hardware -passive cooling, without moving parts, Ethernet and serial comunications. Primary domains to be used in are power transmission, distribution and generation, transport, cooling and heating. Protocols to be used typically - Modbus (Serial(RTU) and TCP IP) , Profibus, CAN bus, ... aditionally other protocols. All additional details will be discussed with selected bidder.

Are you a mobile application developer? If so please contact me..... We need a mobile application to be available on all platforms (Android / Apple & windows application) I want a mobile application wich is connected trough ethernet to the same application but on desktop to access files from pc, like a cloud but using the storage of the pc. Like when you have a network lan. Or better said like TeamViewer but to be able to access the files from pc on mobile and reverse. Please let me know your price.

...1000baseT (gigabit) ethernet selector. The central ethernet connector must be able to be connected with one of the two side connectors, or disconnected from both. Schema is based to TS3L501E Texas Instrument (used like relays) and other 2 logic gates ic. The device work, but the quality of the electronic project and PCB design is low. Signal is disturbed with long cable, about 95 meters only on the central rj45, or with elecromagnetic interference. I need the best stability possible for long ethernet cable, and I ask help only from freelances with good experience in 1000base-t ethernet connection, magnetics discrete or jack with integrated magnetics, pcb projects for improve ethernet stability. For example: the connectors are not with integrated magnet...

I would like to develop a simple USB game controller for Windows. I would like to use hardware from Microchip. Possibly atmega32u4 microprocessor. I would like to hire someone who can write software on a single write microchip, so when the controller is connected, it shows up in Windows with my company brand name.

I would like to develop a simple USB game controller for Windows. I would like to use hardware from Microchip. Possibly atmega32u4 microprocessor. I would like to hire someone who can write software on a single write microchip, so when the controller is connected, it shows up in Windows with my company brand name.

We are a company to provide high speed data connectivity services with its  own  optical  fiber  networks  in  APAC as well as subsea  cable network capacity in the region. Would like to hire someone who can help to write content on some of our available products and services such as Dark Fibre, Wavelength, Ethernet etc. The content could be like an introductory information of what are they, who should use them or a comparison sheet.

Java code for print receipt in Cash register protocol xon xoff ethernet connection

I did design H3 USB Dongle with ESP32. Requirements. 1. Board should boot to Linux from Flash. It should be a very quick Boot, few secs. It should be possible to SSH into the Linux from PC over RNDIS or over Wifi (once configured). 2. When connected to a PC via USB port, the board, at boot, should load RNDIS driver, which would create an Ethernet-Over-USB connection with IP address and Ethernet Interfaces on both the PC and the board. There should be a configuration file on the board that allows configuration of IP Address, Mac Address, Subnet, Gateway, DNS etc… There should be a Default IP address (can be / ) which loads for the first time to allow first access. With RNDIS, is possible to share Internet connection of the PC with the Board Via “Internet Sharin...

Am looking for detailed documentation on how to get my raspberry PI 4 booted to Raspbian in under 10 seconds. Need to use 1 usb port, the ethernet port, and run a python script

I need small businesses to find my link when they need Business Internet, Business SmartOffice, Business TV, Business Phone, Business Trunks, Business SIP Trucks, Business Voice Edge Select, Business Voice Edge, Business Ethernet Service, Business SD-WAN products and/or services. The link is a jotform that asks some simple questions about their company, what products they are looking for, their contact information and permition to contact. I can than have my people call and/or email them about their inquiry for information regarding Corporate Business Packages that can help them save big.

Hi, We are looking for qualified embedded software engineer with good knowledges of: * Hardware: STM32, Atmel/Microchip SAM MCUs, BLE, LoRa (LoRaWAN), NB-IoT * IDE: Keil, Atmel Studio, STM32 Cube * C/C++, Python * Understanding wireless technologies Please don't apply if you are not in Slovenia. Thanks.

I have a lot of works related to different fields of electrical engineering looking for experts in following areas: • Embedded C Programming. • VHDL/Verilog • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • PCB Designing-Proteus, Eagle. • Multisim • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications.

...application: I am adding an ESP32 to an existing WiFi device that runs a TCP/IP stack of its own. This client device will be connected by UART to ESP32 to provide ethernet connectivity. It is my understanding that LwIP already provides a PPP server, so I expect that this should just be a matter of setting up the PPP server and then doing the routing from PPP->WAN. Correspondingly, I have not priced this project for heavy code development. For this example: - Ideally, the code would target ESP32 + ethernet - If you don't have an ESP32 + ethernet hardware avaialble, WAN over ESP32 should be an OK substitution (I believe swapping ethernet for wifi should be a simple change) - I would like to see a demo of a linux PC as the PPP client, and uses the ESP3...

Hi We will start to work on an iot project. It wil include TM4C1294xl Mcu board, with ethernet and GSM add on board for start. We need you to make a project on Keil MDK platform, which will send a string from buffer to a specifiv IP. It ia RAW data, and wait for ACK. If for any reason stting coluld not be sent, it will try over GSM. Ethernet or GSM priority shal be selectable. RTX should be used for multitasking This is short version what we need. Then we will continue work on our own.