Bootloader microchiptrabajos

Looking for a software developer to help finish a project: Requirements: Strong Knowledge of PIC18 Programming (Assembler and/or C), Strong knowledge of Electronics (Analog/Digital) Project Name: AC Motor control with current and voltage sense for current/load compensation. Microcontroller Used: PIC18F46K22(Currently use) – PIC18F47J53(Future), both from Microchip Technology. Scope: Develop and Motor Soft-Starter with power control. Project State: Prototype PCB hardware is designed and fabricated most of the motor control firmware is done; we are missing the load compensation on the firmware. Main Functionalities: 1) The AC motor is controlled by a TRIAC which at the same time is controlled by the Microcontroller. (Hardware Design/Firmware done) 2...

Looking for a software developer to help finish a project: Requirements: Strong Knowledge of PIC18 Programming (Assembler and/or C), Strong knowledge of Electronics (Analog/Digital) Project Name: AC Motor control with current and voltage sense for current/load compensation. Microcontroller Used: PIC18F46K22(Currently use) – PIC18F47J53(Future), both from Microchip Technology. Scope: Develop and Motor Soft-Starter with power control. Project State: Prototype PCB hardware is designed and fabricated most of the motor control firmware is done; we are missing the load compensation on the firmware. Main Functionalities: 1) The AC motor is controlled by a TRIAC which at the same time is controlled by the Microcontroller. (Hardware Design/Firmware done) 2...

This project deals with electronics home security system based on microchip technology and GSM technology.

I need a portable RF module, that will send some sensor data from time to time (maybe 1 hour interval), to a central computer. It must support long range distances. So worker can choose between high power RF transmitters (P2P) or a mesh design like ZigBee / Microchip MiWi. I'll have around 1000 modules placed separated something like 200m from each other. Main product characteristics must be : - low power consumption (powered by battery) - long range distances communication (mesh / p2p) - very low cost They will operate on open field rural environment, so i guess there'll be not very much RF interference from other sources. Small baud rates are acceptable. There's no need to design a custom PCB layout, it all can be done with Evaluation boards or sep...

...with kerrighed cluster. I followed instructions in this link bellow and was partially succeded: There is just some linux issues that I can´t solve. I dont have the necessary experience with linux. I set up the dhcp server and is working (IE clients can connect and a ip is remotelly assigned) TFTP server and PXE bootloader looks like fine also (boot process starts on remote clients) After the network boot starts, I am stucked in a message "VFS: Cannot open root device "nfs" or unknown-block(2,0". I already seach for this problem and can be either cause the compiled kernel is not recognizing the network card or cause my server is not running RPC demons, portmap or rpcbind what I already check but I dont have

Need online support for setting a Ubuntu Diskless Boot Server I followed instructions in this link bellow and was partially succeded: I set up the dhcp server and is working (IE clients can connect and a ip is remotelly assigned) TFTP server and PXE bootloader looks like fine also (boot process starts on remote clients) NFS Server and Bootable FileSystem is the problems I cant handle. (Its stops the boot process, because it can't mount /dev/nfs) I dont know how to resolve this problem, so if you are familiar with those stuff, you can help me online. We can work in a chat or skype. And I will showing system states, screens, commands results and you will guide me to the results and I will pay you for that

HI all P.S at first please ignore the budget , it will be discuses after some discussion. what is my knowlegment I am electronic engineer who work in MCU world such as : microchip and atmel programming it with c language for 6 years , also I have good background in software developing using .net and a little bit in java and linux OS ( install some application and run it , not more. ) what I need now : I plan to move ahead and work with more reliable system , embedded system, using linux , android or vxworks, I need some guide in my process in my plan for example guide in : 1- How to choose the MPU ? 2- what the best and good development board ? 3- what the best os to work with it ? 4- how to download the system in MPU ? 5- how to configure the MPU ? 6- int...

Create prototype pcb's for Atmel 2560 project including Microchip network controllers.

The project is for a simple MP3 player using a Microchip PIC, the choice of PIC should be low cost but has to be Microchip and no other manufacturer. The player should play sound samples, mainly speech stored in files on a micro SD card. The supply rail should be 5V for interfacing purposes. It should have a TTL serial interface, 9600 baud. The file to play will be selected by a serial command such as "Play 1 cr lf" where 1 the name of track 1. The track name can be anything alpha numeric with up to 30 char. When playing the serial interface should reply "playing cr lf" at intervals, when complete and at all other times when no track is playing should report "stopped cr lf" The requirement is for mono only, this is for announcements not enterta...

Hi, We have design of a content based website in PSD format and want to get it converted to HTML (preferably to a responsive html using bootloader). The project needs to be delivered by 30th of December 2013. There are about 30 HTML pages to be created with 6-8 unique pages and the rest would be following the similar pattern This is an urgent need and i can be contacted at the below email address and mobile Saurabh

We are looking for team that can take care of hardware and base software stack (firmware, bootloader) development of custom design board, based on Freescale SoC. Past experience with this SoC is required and you need to post documents that prove that. If you don't elaborate your experience with this SoC your application will be rejected. You will receive more project details after application. Here is quick overview: * Hardware: , 1GB RAM * Interfaces: Ethernet, Wifi, USB, LVDS, HDMI, analog audio * Software: u-boot, Linux, booting from network

I am busy with two projects and need some help writing an LCD menu system, PWM, and A/D routines for the Pic32 Microcontroller in the C language. The libraries are already written and included. These programs will be written in the Microchip MPLab IDE so the project can be shared. I will be working on the circuit engineering while you write the firmware. Testing of the firmware will be with the Pic32 starter kit and development board. If you are familiar with the Pic32 architecture and familiar with the XC32 compiler and the C language it should be no more than 2-4 hours time to complete this task. For those familiar with Atmel or other C compilers for the AtMega or other microcontrollers, it should be no more than 6-8 hours of programming time. The menu system is simple. There i...

make a bootloader to boot an os server in a connectionless campus wide lan .

100% nuovo di alta qualità agli ioni di litio. Usa l'ultima tecnologia della batteria agli ioni di litio. Microchip integrato impedisce il sovraccarico e allunga la durata della batteria. La miglior batteria di ricambio per il vostro telefono. Quantità: . 1PCS tensione:. 3.7V Capienza della batteria: 2680mAh.

100% nuovo di alta qualità agli ioni di litio. Usa l'ultima tecnologia della batteria agli ioni di litio. Microchip integrato impedisce il sovraccarico e allunga la durata della batteria. La miglior batteria di ricambio per il vostro telefono. Quantità: . 1PCS tensione:. 3.7V Capienza della batteria: 2680mAh. Pubblicato con App di eBay

...Developer that has familiarity with Developing Windows Desktop Software and is also Familiar with Microchip PIC MCU's The Scope of Work is for the Freelancer to develop the firmware required for a Microchip PIC MCU 18F45K50. USB Bootloader This Firmware needs to be deliverable as a Hex file that can be downloaded into the MCU to allow for Future Upgrades of the MCY via USB. Second. We need a Windows Desktop Applications that is able to PARSE the Original Compiled Hex File and Convert it for USB Bootload Deployment. The Freelancer will need to have a complete understanding of the boot sectors, configuration bits and memory mapping of the mcu in order to modify the firmware to include the USB Bootloader. Lastly. After the program has modified ...

I want to make a device that will drop into a 1-wire network and provide temp readings just like DS18B20 sensor. But this device would allow you to connect a Thermocouple, Thermistor or RTD. ...readings just like DS18B20 sensor. But this device would allow you to connect a Thermocouple, Thermistor or RTD. Device would need to emulate a DS18B20 so that it could be read by the same code we have that reads current DS18B20 sensors. Device needs to run from 5V. This job consists of determining the best microcontroller and ADC for the job, would prefer something from the Atmel or Microchip line. Schematic Layout PCB Layout Software to run on the device PCB Layout needs to be done in Eagle or Altium PCB will be ordered and the device fully tested before final milestone i...

...provided on microchip_solutions_v2013-06-15USBHost - Mass Storage - Thumb Drive Data LoggerFirmware to my existing project. The freelancer don´t need to make extra programming, only "merge" the two projects, also not need to test, the project must only compile, and have the functionality of the sample. I will provide my existing project, the other project you can download directly from microchip site. (The freelancer can connect to my VM with teamviewer..)...

(18F25j11)Provide an annotated program written in assembly language that will facilitate the use of the RTCC on a Microchip Pic 18f25j11 micro. It should allow for reads/writes from all accessible registers. Ideally, it will also allow for the clock source to be derived from a crystal or the 31khz internal clock.

My HTC Desire 200 model phone is bricked due to wrong recovery and kernel flash. There is not any Rom Update Utility for this model. Only kernel sources are available at HTC DEV website. I do not have a linux PC and I am unable to build kernel. I need somebody who can build a kernel for my phone and fix it. The phone is currently stucks at HTC logo and I can access to bootloader. Factory reset not working. The phone must be run without any problem after the work. HTC Service Required 50 USD for this but I think it is too much for me right now. Please bid under 50 so I can decide. I will try to choose lowest bid. Thanks.

MCU is 9S12XEP100 I already have the bootloader. I need to modify the bootloader to work with an uploading app. Or modify the uploading app to work with bootloader. or modify both. Source codes for both, the bootloader and app is available. Must have experience with motorola/freescale MCU's and S-records .S19 files. I will provide more information if interested.

Microchip c development I Require a template for MPLAB C80 suite Specifically PIC24FJ192GB106 Need a template project with 2 X i2c interfaces (on standard SCL1, SLC2 ) and a seperate SPI interface.

Microchip c development Specifically pic24fj192gb106 with cp16016 tematr Need 2 x ic2 interfaces and one c spi interface

MCU is 9S12XEP100 I already have the bootloader. I need to modify the bootloader to work with an uploading app. Or modify the uploading app to work with bootloader. or modify both. Source codes for both, the bootloader and app is available. Must have experience with motorola/freescale MCU's and S-records .S19 files. I will provide more information if interested.

I would actually like to implement MFCC and HMM speech algorithms on the dspicdem 1.1 plus board. W...designed should be able to accept voice commands from the user. For example if the user asks what is the time, the clock should respond with the correct time. The user would also be able to ask for temperature, set an alarm and change the time. The clock should also be able to connect to the Internet. Design should be based on the Microchip DSPICDEM 1.1 plus board. Ok. the aim of the project is to implement MFCC and HMM voice recognition algorithms on the microchip dspic dem 1.1 plus board are you familiar with those algorithms only one users voice should be recognized which should be my voice and board should be connected to internet to get information like time, temp...

I am looking for some software to be written in C for the FTDI Viniculumn II chip. The FTDI Viniculumn II chip will be controlled by a Microchip PIC 24 microcontroller. I need software that will allow the Viniculumn II to operate as a Host device to allow USB Keyboard, mouse or USB drive to be connected. I also need the Viniculumn II device to automatically switch if connected to a host device (PC) so that it can act as a complex HID device, and appears to the attached PC as a keyboard, a mouse, a serial link, and possibly a multi-touch touchscreen controller.

Good Morning, We started planning new projects concerning "Fleet MAnagement" and "GPS Tracking". These tasks will be based on a common hardware platform device based on PIC18XXXXXX, dsPIC33XXXXXX and PIC32XXXXXX from "Arizona Microchip Semiconductors". For this reason we are looking for Firmware Developers with Years of Experience in following items: 1. C and Assembly languages for firmware development 2. "MikroC_Pro for PIC32" developing environment.

Witam, Zlecę napisanie programu na mikrokontroler, który czyta "scan cody" z klawiatury USB i wysyła je w postaci protokołu PS/2. Czyli emulator klawiatury PS/2 na klawiaturze USB. Język programowania dowolny. Poniżej przykładowe rodziny mikrokontrolerów: 1. Najchętniej któryś z rodziny VNC2... (Vinculum II) firmy FTDI. 2. PIC24FJ...., PIC32... firmy Microchip 3. ATSAM... firmy Atmel. lub dowolnie wybrany, lecz łatwo dostępny mikrokontroler. Program powinien działać dla klawiatur przewodowych i bezprzewodowych.

I need a microchip for a pressurized plastic cup that would turn a battery on for approximately 5-8 secs upon pressing down completely on the entire lip of the cup

I need a simple bootloader and a custom .S19 loading app for freescale 9S12XEP100. More info in here:

I need a bootloader and a custom .S19 loading app for freescale 9S12XEP. More info in here:

I need a bootloader and a custom loading app for freescale 9S12XEP. More info in here:

i am currently running a program for a client whom wants me to program a chip card to auto run on inserting on a chip platform , the chip would be programmed with an ISO which needs to be auto run chip card info is stated below The Smart Card SILVER is a field programmable ISO-7816-1 pin-out compatible multi-chip Smart Card featuring the Microchip Technology, Inc. PIC16F876 + 24LC64 die. The card features an expanded data memory and is ideally suited for applications requiring field programming and reprogramming, short time to market and small to medium volume roll outs. The card may differ from picture as 'Silver' is a generic description of the PIC microcontroller and memory chip, not a description of card colour. They are often white, and can have optional cutout...

someone who has vast knowledge with bootloder , has a very good understanding of hackintosh process. java is a must as looking to create a web browser plugins to create custom booter based on end user hardware profile. I will have detail description. may contact me on Skype: [Removed by Freelancer.com Admin]

I have a small ubuntu machine with a raid 0. Now one of the two harddrives died. I replaced the drive but can not start ubuntu any more. Now I am looking for someone who can connect to my machine with teamviewer. Teamviewer is running on a live ubuntu system bootet from cd. Please only bid if you have time NOW -> around 9:00 CET

Modify or write a Bootloader program to upload .s19 file to 9S12XEP100 uC. Bootloader file: Application note:

Modify and edit a Bootloader program to upload .s19 file to 9S12XEP100 uC. Bootloader file: Application note:

Hi I made a LED PCB Board with USB and the Microchip PIC18F4550, but I'm having problems with the programing and USB recognizing. I need the files which should be uploaded to the chip (is empty) and a sample light code.( all on/off, one side on / off, each separately on/off)

Customise existing ROM firmware Make english default language Make sure firmware and ROM are stable.. Create and install beautiful bootloader Install beautiful theme light weight Etc

... I will need the schematic at the end when the product is finished to produce the printed boards based on the temporary board. Basically, the purpose of the job is to replace the original DC motor with a stepper motor (ajustable pulse so the drive shaft can be customized). Finally, control the printer using apps to send command through wireless or bluetooth. The code must be transferable to microchip to run everything on printed board not arduino or any other interface. Final product will include: -Testing with temporary board (can be lead board or anything) to proof it works. -Schematic of the printed board.. -Android or IOS app (optional) Function include: -Emergency stop button. -Stop position using sensor ( when the metal touch the sensor, the printer stop). -...

Here is a brief description Infineon Tricore CPU ( mostly TC1796 / TC1797 ) from mainly automotive control units. If you have experience with debugging infineon tricore , bootloader code, tricore architecture , embedded security, reverse engineering, .... we could use you in our team or if your company can handle this project for us, we would outsource it completely to you.

Need engineer to look at existing code and design of USB joystick game controller board in the public domain, and make necessary changes to code and circuit design so as not to infringe on copyright. Delivered product will be one working prototype board, including new code, and gerber files. Manufactured product will cost no more than $5.00 based on volume purchases of electronic components. Microchip will be an Atmega8(or newer alternative) in order to keep costs low. Before bidding, please look at and to understand what I need. When prototype is delivered, it should be USB plug and play. Windows Device Manager will recognize it as a" (my name) gamestick controller" with 8 axis and 12+ switches

Description: Based on the code "demo app TCPIP" included in the Microchip Library the project is to add: A I2C feature (I2C2) to read 8 registers from a slave. The code must run with existing TCPIP Demo application. To do it you must have a PIC32 ESK (DM320004).

We have developed a small project based on a PIC18F46J50 that communicates through USB to a PC, using a C# based GUI. The device h...temperature values with a configurable sample time and send them to the PC. Also the system can be configured through the interface. We are looking for an engineer to make an adaption so the communication would work wirelessly. There are several restrictions: - the PIC code should be written in C, using MPLAB IDE and C18 compiler - the transceiver should be MRF24WB0MA from Microchip - the TCP/IP Stack from Microchip should be used( though we are open to a new idea, if it brings some substantial advantages) With your bid, please explain in a few words your approach on this matter. New ideas are a definite plus and will have an impact on ou...

Hello, I want to add a new feature to the TCP stack from Microchip. I need to create a TCP Client that will send data to the cloud () using method POST. Your task is to modify TCP client which that stack already contains. It will send data to the cloud (). It will send 6 values using POST method. You make the function in form: SendDataToCloud (float v1, float v2, float v3, float v4, float v5, float v6). New feature will be in C language and is compatible with the TCP stack (built without error messages). Procesor: PIC18F67J60 TCP Stack: 5.20 MPLAB IDE 8.83 MPLAB C18 COMPILER Thank you. FM

I have a mSATA memory problem. Lost connection to the mSATA; not recognized in BIOS, and not seen...power off and disconnect SSD fra mSATA for 30 secs, reconnect and repeat). I have now taken the memory out, and replaced it with another SSD from Samsung. I can connect the old Crucial m4 mSATA 256GB via USB (I have a adapter for this). Possibly there are some software for Windows 8 64-bit that can be used to restore connection to the SSD and fix any errors on the SSD, like rebuilding EFI Bootloader and other problems... Look forward to receive quote if you are specialized in SSD data recovery. I will work closely with the selected freelancer to solve this problem, and expect that you are communicating in english effectively. Feel free to ask any question before you bi...

I need a secure HID Bootloader for the NXP LPC17xx MCU The software needs to be able to load a binary over HID that has been encrypted, AES, 3DES, etc.. and decrypt it on the MCU and write to flash memory. On boot up the bootloader should check the status of the program, and if program does not exist or is corrupted it should enter into bootloader mode where it waits for a new firmware to be loaded via USB-HID. I am sure this has been written many times before so it may be as easy as sharing your implementation. There are a lot of examples of HID bootloaders and some Atmel projects that are using AES but none of these have been ported to the LPC17xx. Deliverable s: Keil Project with all source code for the bootloader Small windows application that writ...

Need a Very small and simple Project Consist in a pic 16f628a 4x4 matrix keypad Need to read the key pressed , then send the data to a other device i already have ( data/clock input ps2 port) will need the sorce code and the scheme how to connect the keypad I will need to use the internal 4mhz oscilator from the pic and can be used 4 10 k resistors if needed This is not a new project.. i am trying to recover a lost project , i have my last 10 microcontrollers whit this hex and then im done ( Have lost the c files) my matrix is the basic line 1 - 1,2,3 , enter line 2 - 4,5,6 line 3 - 7,8,9 line 4 - 0 ,#,* column 1 - 1,4,7,0 column 2 - 2,5,8, # column 3 - 3,6,9,* column 4 - enter I need the most easy interface , maybe using pull up resistors or something like that...

Hi, I would like to know if you managed to complete this project? https://www.freelancer.com/projects/Engineering-Electronics/Arduino-UNI-Serial-EEPROM-Family.html And did you build a library or is the entire code in one Arduino file? If everything is already coded, it shouldn't take you too much time to comment the code, right? Please let me know your thoughts. Thanks

Hello, I want to add a new feature to the TCP stack from Microchip. I need to create a TCP Client that will send data to the cloud () using method POST. Your task is to modify TCP client which that stack already contains. It will send data to the cloud (). It will send 6 values using POST method. You make the function in form: SendDataToCloud (float v1, float v2, float v3, float v4, float v5, float v6). New feature will be in C language and is compatible with the TCP stack (built without error messages). Procesor: PIC18F67J60 TCP Stack: 5.20 MPLAB IDE 8.83 MPLAB C18 COMPILER Thank you. FM